On Wed, Feb 15, 2017 at 03:52:59PM +0200, Mika Kuoppala wrote:
> Certain Baytrails, namely the 4 cpu core variants, have been
> plaqued by spurious system hangs, mostly occurring with light loads.
>
> Multiple bisects by various people point to a commit which changes the
> reclocking strategy for Baytrail to follow its bigger brethen:
> commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail")
>
> There is also a review comment attached to this commit from Deepak S
> on avoiding punit access on Cherryview and thus it was excluded on
> common reclocking path. By taking the same approach and omitting
> the punit access by not tweaking the thresholds when the hardware
> has been asked to move into different frequency, considerable gains
> in stability have been observed.
>
> With J1900 box, light render/video load would end up in system hang
> in usually less than 12 hours. With this patch applied, the cumulative
> uptime has now been 34 days without issues. To provoke system hang,
> light loads on both render and bsd engines in parallel have been used:
> glxgears >/dev/null 2>/dev/null &
> mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4
>
> So far, author has not witnessed system hang with above load
> and this patch applied. Reports from the tenacious people at
> kernel bugzilla are also promising.
>
> Considering that the punit access frequency with this patch is
> considerably less, there is a possibility that this will push
> the, still unknown, root cause past the triggering point on most loads.
>
> But as we now can reliably reproduce the hang independently,
> we can reduce the pain that users are having and use a
> static thresholds until a root cause is found.
>
> v3: don't break debugfs and simplification (Chris Wilson)
>
> References: https://bugzilla.kernel.org/show_bug.cgi?id=109051
> Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Len Brown <len.brown@xxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: fritsch@xxxxxxxx
> Cc: miku@xxxxxx
> Cc: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
> CC: Michal Feix <michal@xxxxxxx>
> Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
> Cc: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
> Cc: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.2+
> Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Signed-off-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
Had a couple of weekends to try and find an alternative explanation
(a root cause for the hangs would be nice!). If it is just the writes to
the RPS registers, are we safe on resume (etc)?
However, I've drawn a blank on explaining what the hw is doing wrong
(but found a couple of bugs in the byt manual RPS evaluation which
desire review), so
Acked-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
-Chris
--
Chris Wilson, Intel Open Source Technology Centre