3.16.40-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Richard Weinberger <richard@xxxxxx> commit 2365418879e9abf12ea9def7f9f3caf0dfa7ffb0 upstream. When Fastmap is used we can face here an -EBADMSG since Fastmap cannot know about unmaps. If the erasure was interrupted the PEB may show ECC errors and UBI would go to ro-mode as it assumes that the PEB was check during attach time, which is not the case with Fastmap. Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger <richard@xxxxxx> Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/mtd/ubi/wl.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1000,7 +1000,7 @@ static int wear_leveling_worker(struct u int cancel) { int err, scrubbing = 0, torture = 0, protect = 0, erroneous = 0; - int vol_id = -1, lnum = -1; + int erase = 0, keep = 0, vol_id = -1, lnum = -1; #ifdef CONFIG_MTD_UBI_FASTMAP int anchor = wrk->anchor; #endif @@ -1134,6 +1134,16 @@ static int wear_leveling_worker(struct u e1->pnum); scrubbing = 1; goto out_not_moved; + } else if (ubi->fast_attach && err == UBI_IO_BAD_HDR_EBADMSG) { + /* + * While a full scan would detect interrupted erasures + * at attach time we can face them here when attached from + * Fastmap. + */ + dbg_wl("PEB %d has ECC errors, maybe from an interrupted erasure", + e1->pnum); + erase = 1; + goto out_not_moved; } ubi_err("error %d while reading VID header from PEB %d", @@ -1167,6 +1177,7 @@ static int wear_leveling_worker(struct u * Target PEB had bit-flips or write error - torture it. */ torture = 1; + keep = 1; goto out_not_moved; } @@ -1252,7 +1263,7 @@ out_not_moved: ubi->erroneous_peb_count += 1; } else if (scrubbing) wl_tree_add(e1, &ubi->scrub); - else + else if (keep) wl_tree_add(e1, &ubi->used); ubi_assert(!ubi->move_to_put); ubi->move_from = ubi->move_to = NULL; @@ -1264,6 +1275,12 @@ out_not_moved: if (err) goto out_ro; + if (erase) { + err = do_sync_erase(ubi, e1, vol_id, lnum, 1); + if (err) + goto out_ro; + } + mutex_unlock(&ubi->move_mutex); return 0;