[PATCH] USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This development kit has an FT4232 on it with a custom USB VID/PID.
The FT4232 provides four UARTs, but only two are used. The UART 0
is used by the FlashPro5 programmer and UART 2 is connected to the
SmartFusion2 CortexM3 SoC UART port.

Note that the USB VID is registered to Actel according to Linux USB
VID database, but that was acquired by Microsemi.

Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Cc: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/usb/serial/ftdi_sio.c     |  1 +
 drivers/usb/serial/ftdi_sio_ids.h | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c98cf10be5af..14f0fb34f655 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -873,6 +873,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
 					USB_CLASS_VENDOR_SPEC,
 					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
+	{ USB_DEVICE(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 168ccb03ce08..a9d538d18344 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -627,6 +627,16 @@
 #define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
 
 /*
+ * Microsemi/Arrow SF2PLUS Dev Kit
+ *
+ * This board has an FT4232 on it which provides four UART ports.
+ * UART 0 is used by the FlashPro5 programmer, UART 2 is connected
+ * to the UART of an CortexM3 SoC-FPGA on the board.
+ */
+#define ACTEL_VID				0x1514
+#define MICROSEMI_ARROW_SF2PLUS_BOARD_PID	0x2008
+
+/*
  * RATOC REX-USB60F
  */
 #define RATOC_VENDOR_ID		0x0584
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]