3.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Steffen Maier <maier@xxxxxxxxxxxxxxxxxx> commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream. Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. [Backported for 3.4-stable. commit a53c8fa since v3.6-rc1 unified copyright messages, e.g: revise such messages 'Copyright IBM Corporation' as 'Copyright IBM Corp', so updated the messages as a53c8fa did. - zliu] Signed-off-by: Steffen Maier <maier@xxxxxxxxxxxxxxxxxx> Reviewed-by: Martin Peschke <mpeschke@xxxxxxxxxxxxxxxxxx> Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx> Signed-off-by: Zhouping Liu <zliu@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/s390/scsi/zfcp_scsi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -3,7 +3,7 @@ * * Interface to Linux SCSI midlayer. * - * Copyright IBM Corporation 2002, 2010 + * Copyright IBM Corp. 2002, 2013 */ #define KMSG_COMPONENT "zfcp" @@ -311,8 +311,12 @@ static struct scsi_host_template zfcp_sc .proc_name = "zfcp", .can_queue = 4096, .this_id = -1, - .sg_tablesize = 1, /* adjusted later */ - .max_sectors = 8, /* adjusted later */ + .sg_tablesize = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1) + * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2), + /* GCD, adjusted later */ + .max_sectors = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1) + * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8, + /* GCD, adjusted later */ .dma_boundary = ZFCP_QDIO_SBALE_LEN - 1, .cmd_per_lun = 1, .use_clustering = 1, -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html