[PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores"),
the USB ports on odroid-XU4 don't work anymore.

Inserting an usb key (USB2.0) on the USB3.0 port result in:
[   64.488264] xhci-hcd xhci-hcd.2.auto: Port resume took longer than 20000 msec, port status = 0xc400fe3
[   74.568156] xhci-hcd xhci-hcd.2.auto: xHCI host not responding to stop endpoint command.
[   74.574806] xhci-hcd xhci-hcd.2.auto: Assuming host is dying, halting host.
[   74.601970] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
[   74.606276] usb 3-1: USB disconnect, device number 2
[   74.613565] usb 4-1: USB disconnect, device number 2
[   74.621208] usb usb3-port1: couldn't allocate usb_device
NB: it's not related to USB2.0 devices, I get the same result with an USB3.0 device (SATA to USB3 for instance).
NB2: it doesn't happen on an odriod-XU3 board, that doesn't have the realtek RTL8153 chip.

If the lines:
	if (dwc->revision > DWC3_REVISION_194A)
		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
are commented out, the USB3.0 start working.

For a full analyse: https://lkml.org/lkml/2017/1/18/678

Felipe suggested that suspend should be disabled temporarily while
what's wrong with DCW3 is figured out.

Tested on Odroid XU4

Suggested-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Tested-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # 4.4+
Fixes: 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores")
---
 arch/arm/boot/dts/exynos5422-odroidxu4.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 2faf88627a48..f62dbd9b5ad3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -43,6 +43,15 @@
 	status = "okay";
 };
 
+&usbdrd_dwc3_0 {
+	/*
+	 * without that, usb devices are not recognized when
+	 * they are plugged.
+	 * cf: https://lkml.org/lkml/2017/1/18/678
+	 */
+	snps,dis_u3_susphy_quirk;
+};
+
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]