The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Cc: stable@xxxxxxxxxxxxxxx Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> --- drivers/rtc/rtc-sun6i.c | 6 ++++++ 1 file changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c index 5527f5eb597b..47f2022948a6 100644 --- a/drivers/rtc/rtc-sun6i.c +++ b/drivers/rtc/rtc-sun6i.c @@ -37,9 +37,11 @@ /* Control register */ #define SUN6I_LOSC_CTRL 0x0000 +#define SUN6I_LOSC_CTRL_KEY (0x16aa << 16) #define SUN6I_LOSC_CTRL_ALM_DHMS_ACC BIT(9) #define SUN6I_LOSC_CTRL_RTC_HMS_ACC BIT(8) #define SUN6I_LOSC_CTRL_RTC_YMD_ACC BIT(7) +#define SUN6I_LOSC_CTRL_EXT_OSC BIT(0) #define SUN6I_LOSC_CTRL_ACC_MASK GENMASK(9, 7) /* RTC */ @@ -417,6 +419,10 @@ static int sun6i_rtc_probe(struct platform_device *pdev) /* disable alarm wakeup */ writel(0, chip->base + SUN6I_ALARM_CONFIG); + /* switch to the external, more precise, oscillator */ + writel(SUN6I_LOSC_CTRL_KEY | SUN6I_LOSC_CTRL_EXT_OSC, + chip->base + SUN6I_LOSC_CTRL); + chip->rtc = rtc_device_register("rtc-sun6i", &pdev->dev, &sun6i_rtc_ops, THIS_MODULE); if (IS_ERR(chip->rtc)) { -- git-series 0.8.11 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html