Patch "tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done" has been added to the 4.9-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tty-serial-atmel-rs485-half-duplex-w-dma-enable-rx-after-tx-is-done.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From b389f173aaa1204d6dc1f299082a162eb0491545 Mon Sep 17 00:00:00 2001
From: Richard Genoud <richard.genoud@xxxxxxxxx>
Date: Tue, 6 Dec 2016 13:05:33 +0100
Subject: tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done

From: Richard Genoud <richard.genoud@xxxxxxxxx>

commit b389f173aaa1204d6dc1f299082a162eb0491545 upstream.

When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.

Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.

But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.

This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.

Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.

Reported-by: Gil Weber <webergil@xxxxxxxxx>
Fixes: 0058f0871efe7b01c6
Tested-by: Gil Weber <webergil@xxxxxxxxx>
Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/tty/serial/atmel_serial.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -798,6 +798,11 @@ static void atmel_complete_tx_dma(void *
 	 */
 	if (!uart_circ_empty(xmit))
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
+	else if ((port->rs485.flags & SER_RS485_ENABLED) &&
+		 !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+		/* DMA done, stop TX, start RX for RS485 */
+		atmel_start_rx(port);
+	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -900,12 +905,6 @@ static void atmel_tx_dma(struct uart_por
 		desc->callback = atmel_complete_tx_dma;
 		desc->callback_param = atmel_port;
 		atmel_port->cookie_tx = dmaengine_submit(desc);
-
-	} else {
-		if (port->rs485.flags & SER_RS485_ENABLED) {
-			/* DMA done, stop TX, start RX for RS485 */
-			atmel_start_rx(port);
-		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)


Patches currently in stable-queue which might be from richard.genoud@xxxxxxxxx are

queue-4.9/tty-serial-atmel-rs485-half-duplex-w-dma-enable-rx-after-tx-is-done.patch
queue-4.9/tty-serial-atmel_serial-bug-stop-dma-from-transmitting-in-stop_tx.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]