This is a note to let you know that I've just added the patch titled
drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-nouveau-i2c-gk110b-gm10x-use-the-correct-implementation.patch
and it can be found in the queue-4.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 5b3800a6b763874e4a23702fb9628d3bd3315ce9 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@xxxxxxxxxx>
Date: Thu, 3 Nov 2016 16:37:33 +1000
Subject: drm/nouveau/i2c/gk110b,gm10x: use the correct implementation
From: Ben Skeggs <bskeggs@xxxxxxxxxx>
commit 5b3800a6b763874e4a23702fb9628d3bd3315ce9 upstream.
DPAUX registers moved on Kepler, these chipsets were still using the
Fermi implementation for some reason.
This fixes detection of hotplug/sink IRQs on DP connectors.
Signed-off-by: Ben Skeggs <bskeggs@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/nouveau/nvkm/engine/device/base.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
@@ -1851,7 +1851,7 @@ nvf1_chipset = {
.fb = gk104_fb_new,
.fuse = gf100_fuse_new,
.gpio = gk104_gpio_new,
- .i2c = gf119_i2c_new,
+ .i2c = gk104_i2c_new,
.ibus = gk104_ibus_new,
.iccsense = gf100_iccsense_new,
.imem = nv50_instmem_new,
@@ -1965,7 +1965,7 @@ nv117_chipset = {
.fb = gm107_fb_new,
.fuse = gm107_fuse_new,
.gpio = gk104_gpio_new,
- .i2c = gf119_i2c_new,
+ .i2c = gk104_i2c_new,
.ibus = gk104_ibus_new,
.iccsense = gf100_iccsense_new,
.imem = nv50_instmem_new,
@@ -1999,7 +1999,7 @@ nv118_chipset = {
.fb = gm107_fb_new,
.fuse = gm107_fuse_new,
.gpio = gk104_gpio_new,
- .i2c = gf119_i2c_new,
+ .i2c = gk104_i2c_new,
.ibus = gk104_ibus_new,
.iccsense = gf100_iccsense_new,
.imem = nv50_instmem_new,
Patches currently in stable-queue which might be from bskeggs@xxxxxxxxxx are
queue-4.8/drm-nouveau-ttm-wait-for-bo-fence-to-signal-before-unmapping-vmas.patch
queue-4.8/drm-nouveau-bios-require-checksum-to-match-for-fast-acpi-shadow-method.patch
queue-4.8/drm-nouveau-gr-fallback-to-legacy-paths-during-firmware-lookup.patch
queue-4.8/drm-nouveau-kms-lvds-panel-strap-moved-again-on-maxwell.patch
queue-4.8/drm-nouveau-ltc-protect-clearing-of-comptags-with-mutex.patch
queue-4.8/drm-nouveau-fifo-gf100-protect-channel-preempt-with-subdev-mutex.patch
queue-4.8/drm-nouveau-i2c-gk110b-gm10x-use-the-correct-implementation.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html