The firmware on some cherrytrail devices wrongly adds _ADR 0 to their entry describing the 80860F14 uid "2" sd-controller. I believe the firmware writers intended this as a sdio function address, but it is in the wrong place for this, so it gets interpreted as a pci address, causing the node describing the sd-controller used for the sdio-wifi to get seen as a firmware_node for the pci host bridge, rather then being stand-alone device. This commit adds a byt_sdio_setup function which detects this scenario and removes the wrong firmware_node link from the pci host bridge, which fixes acpi_create_platform_device returning NULL, leading to non-working sdio-wifi. BugLink: https://github.com/hadess/rtl8723bs/issues/80 Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/acpi/acpi_lpss.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 373657f..df9cc66 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -84,6 +84,7 @@ static const struct lpss_device_desc lpss_dma_desc = { }; struct lpss_private_data { + struct acpi_device *adev; void __iomem *mmio_base; resource_size_t mmio_size; unsigned int fixed_clk_rate; @@ -154,6 +155,33 @@ static void byt_i2c_setup(struct lpss_private_data *pdata) writel(0, pdata->mmio_base + LPSS_I2C_ENABLE); } +static void byt_sdio_setup(struct lpss_private_data *pdata) +{ + unsigned long long adr; + acpi_status status; + struct device *dev; + + /* + * Some firmware has a broken _ADR 0 enter for the 80860F14:2 + * device, which causes it to get seen as the firmware_node + * for the pci host bridge, rather then a stand alone device. + * + * Check if this is the case, and if it is remove the link. + */ + if (strcmp(acpi_device_uid(pdata->adev), "2") != 0) + return; + + status = acpi_evaluate_integer(pdata->adev->handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status) || adr != 0) + return; + + dev = acpi_get_first_physical_node(pdata->adev); + if (!dev) + return; + + acpi_unbind_one(dev); +} + static const struct lpss_device_desc lpt_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .prv_offset = 0x800, @@ -217,6 +245,7 @@ static const struct lpss_device_desc byt_spi_dev_desc = { static const struct lpss_device_desc byt_sdio_dev_desc = { .flags = LPSS_CLK, + .setup = byt_sdio_setup, }; static const struct lpss_device_desc byt_i2c_dev_desc = { @@ -425,6 +454,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } + pdata->adev = adev; pdata->dev_desc = dev_desc; if (dev_desc->setup) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html