Re: [PATCH] crypto: marvell - Copy IVDIG before launching partial DMA ahash requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 14 Dec 2016 14:17:37 +0100
Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx> wrote:

> Currently, inner IV/DIGEST data are only copied once into the hash
> engines and not set explicitly before launching a request that is not a
> first frag. This is an issue especially when multiple ahash reqs are
> computed in parallel or chained with cipher request, as the state of the
> request being computed is not updated into the hash engine. It leads to
> non-deterministic corrupted digest results.
> 
> Fixes: commit 2786cee8e50b ("crypto: marvell - Move SRAM I/O operat...")
> Signed-off-by: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>

Just a minor comment (see below), otherwise

Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>

> ---
>  drivers/crypto/marvell/cesa.h |  3 ++-
>  drivers/crypto/marvell/hash.c | 29 ++++++++++++++++++++++++++++-
>  drivers/crypto/marvell/tdma.c |  9 ++++++++-
>  3 files changed, 38 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/crypto/marvell/cesa.h b/drivers/crypto/marvell/cesa.h
> index a768da7..b7872f6 100644
> --- a/drivers/crypto/marvell/cesa.h
> +++ b/drivers/crypto/marvell/cesa.h
> @@ -273,7 +273,8 @@ struct mv_cesa_op_ctx {
>  #define CESA_TDMA_SRC_IN_SRAM			BIT(30)
>  #define CESA_TDMA_END_OF_REQ			BIT(29)
>  #define CESA_TDMA_BREAK_CHAIN			BIT(28)
> -#define CESA_TDMA_TYPE_MSK			GENMASK(27, 0)
> +#define CESA_TDMA_SET_STATE			BIT(27)
> +#define CESA_TDMA_TYPE_MSK			GENMASK(26, 0)
>  #define CESA_TDMA_DUMMY				0
>  #define CESA_TDMA_DATA				1
>  #define CESA_TDMA_OP				2
> diff --git a/drivers/crypto/marvell/hash.c b/drivers/crypto/marvell/hash.c
> index 317cf02..4eb4564 100644
> --- a/drivers/crypto/marvell/hash.c
> +++ b/drivers/crypto/marvell/hash.c
> @@ -285,8 +285,21 @@ static void mv_cesa_ahash_step(struct crypto_async_request *req)
>  	struct ahash_request *ahashreq = ahash_request_cast(req);
>  	struct mv_cesa_ahash_req *creq = ahash_request_ctx(ahashreq);
>  
> -	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ)
> +	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ) {
> +
> +		/* We must explicitely set the digest state. */
> +		if (creq->base.chain.first->flags & CESA_TDMA_SET_STATE) {
> +			struct mv_cesa_engine *engine = creq->base.engine;
> +			int i;
> +
> +			/* Set the hash state in the IVDIG regs. */
> +			for (i = 0; i < ARRAY_SIZE(creq->state); i++)
> +				writel_relaxed(creq->state[i], engine->regs +
> +					       CESA_IVDIG(i));
> +		}
> +
>  		mv_cesa_dma_step(&creq->base);

Nit: can you move the above code in a function called
mv_cesa_ahash_dma_step()?

> +	}
>  	else
>  		mv_cesa_ahash_std_step(ahashreq);

I'm pretty sure checkpatch complains here ;-).

>  }
> @@ -586,10 +599,14 @@ static int mv_cesa_ahash_dma_req_init(struct ahash_request *req)
>  	unsigned int frag_len;
>  	int ret;
>  	u32 type;
> +	bool set_state = false;
>  
>  	basereq->chain.first = NULL;
>  	basereq->chain.last = NULL;
>  
> +	if (!mv_cesa_mac_op_is_first_frag(&creq->op_tmpl))
> +		set_state = true;
> +
>  	if (creq->src_nents) {
>  		ret = dma_map_sg(cesa_dev->dev, req->src, creq->src_nents,
>  				 DMA_TO_DEVICE);
> @@ -683,6 +700,16 @@ static int mv_cesa_ahash_dma_req_init(struct ahash_request *req)
>  	if (type != CESA_TDMA_RESULT)
>  		basereq->chain.last->flags |= CESA_TDMA_BREAK_CHAIN;
>  
> +	if (set_state) {
> +
> +		/*
> +		 * Put the CESA_TDMA_SET_STATE flag on the first tdma desc to
> +		 * let the step logic know that the IVDIG registers should be
> +		 * explicitly set before launching a TDMA chain.
> +		 */
> +		basereq->chain.first->flags |= CESA_TDMA_SET_STATE;
> +	}
> +
>  	return 0;
>  
>  err_free_tdma:
> diff --git a/drivers/crypto/marvell/tdma.c b/drivers/crypto/marvell/tdma.c
> index 4416b88..c76375f 100644
> --- a/drivers/crypto/marvell/tdma.c
> +++ b/drivers/crypto/marvell/tdma.c
> @@ -109,7 +109,14 @@ void mv_cesa_tdma_chain(struct mv_cesa_engine *engine,
>  		last->next = dreq->chain.first;
>  		engine->chain.last = dreq->chain.last;
>  
> -		if (!(last->flags & CESA_TDMA_BREAK_CHAIN))
> +		/*
> +		 * Break the DMA chain if the CESA_TDMA_BREAK_CHAIN is set on
> +		 * the last element of the current chain, or if the request
> +		 * being queued needs the IV regs to be set before lauching
> +		 * the request.
> +		 */
> +		if (!(last->flags & CESA_TDMA_BREAK_CHAIN) &&
> +		    !(dreq->chain.first->flags & CESA_TDMA_SET_STATE))
>  			last->next_dma = dreq->chain.first->cur_dma;
>  	}
>  }

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]