On 11/30/2016 01:04 PM, Thomas Gleixner wrote:
David reported a futex/rtmutex state corruption. It's caused by the
following problem:
CPU0 CPU1 CPU2
l->owner=T1
rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T2)
boost()
unlock(l->wait_lock)
schedule()
rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T3)
boost()
unlock(l->wait_lock)
schedule()
signal(->T2) signal(->T3)
lock(l->wait_lock)
dequeue(T2)
deboost()
unlock(l->wait_lock)
lock(l->wait_lock)
dequeue(T3)
===> wait list is now empty
deboost()
unlock(l->wait_lock)
lock(l->wait_lock)
fixup_rt_mutex_waiters()
if (wait_list_empty(l)) {
owner = l->owner & ~HAS_WAITERS;
l->owner = owner
==> l->owner = T1
}
lock(l->wait_lock)
rt_mutex_unlock(l) fixup_rt_mutex_waiters()
if (wait_list_empty(l)) {
owner = l->owner & ~HAS_WAITERS;
cmpxchg(l->owner, T1, NULL)
===> Success (l->owner = NULL)
l->owner = owner
==> l->owner = T1
}
That means the problem is caused by fixup_rt_mutex_waiters() which does the
RMW to clear the waiters bit unconditionally when there are no waiters in
the rtmutexes rbtree.
This can be fatal: A concurrent unlock can release the rtmutex in the
fastpath because the waiters bit is not set. If the cmpxchg() gets in the
middle of the RMW operation then the previous owner, which just unlocked
the rtmutex is set as the owner again when the write takes place after the
successfull cmpxchg().
The solution is rather trivial: Verify that the owner member of the rtmutex
has the waiters bit set before clearing it. This does not require a
cmpxchg() or other atomic operations because the waiters bit can only be
set and cleared with the rtmutex wait_lock held. It's also safe against the
fast path unlock attempt. The unlock attempt via cmpxchg() will either see
the bit set and take the slowpath or see the bit cleared and release it
atomically in the fastpath.
It's remarkable that the test program provided by David triggers on ARM64
and MIPS64 really quick, but it refuses to reproduce on x8664, while the
problem exists there as well. That refusal might explain that this got not
discovered earlier despite the bug existing from day one of the rtmutex
implementation more than 10 years ago.
Thanks to David for meticulously instrumenting the code and providing the
information which allowed to decode this subtle problem.
Fixes: 23f78d4a03c5 ("[PATCH] pi-futex: rt mutex core")
Reported-by: David Daney<ddaney@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner<tglx@xxxxxxxxxxxxx>
Cc:stable@xxxxxxxxxxxxxxx
FWIW:
Tested-by: David Daney <david.daney@xxxxxxxxxx>
... on arm64 and mips64 where it fixes the failures we were seeing.
Thanks to Thomas for taking the time to work through this thing.
David Daney
---
kernel/locking/rtmutex.c | 68 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 2 deletions(-)
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -65,8 +65,72 @@ static inline void clear_rt_mutex_waiter
static void fixup_rt_mutex_waiters(struct rt_mutex *lock)
{
- if (!rt_mutex_has_waiters(lock))
- clear_rt_mutex_waiters(lock);
+ unsigned long owner, *p = (unsigned long *) &lock->owner;
+
+ if (rt_mutex_has_waiters(lock))
+ return;
+
+ /*
+ * The rbtree has no waiters enqueued, now make sure that the
+ * lock->owner still has the waiters bit set, otherwise the
+ * following can happen:
+ *
+ * CPU 0 CPU 1 CPU2
+ * l->owner=T1
+ * rt_mutex_lock(l)
+ * lock(l->lock)
+ * l->owner = T1 | HAS_WAITERS;
+ * enqueue(T2)
+ * boost()
+ * unlock(l->lock)
+ * block()
+ *
+ * rt_mutex_lock(l)
+ * lock(l->lock)
+ * l->owner = T1 | HAS_WAITERS;
+ * enqueue(T3)
+ * boost()
+ * unlock(l->lock)
+ * block()
+ * signal(->T2) signal(->T3)
+ * lock(l->lock)
+ * dequeue(T2)
+ * deboost()
+ * unlock(l->lock)
+ * lock(l->lock)
+ * dequeue(T3)
+ * ==> wait list is empty
+ * deboost()
+ * unlock(l->lock)
+ * lock(l->lock)
+ * fixup_rt_mutex_waiters()
+ * if (wait_list_empty(l) {
+ * l->owner = owner
+ * owner = l->owner & ~HAS_WAITERS;
+ * ==> l->owner = T1
+ * }
+ * lock(l->lock)
+ * rt_mutex_unlock(l) fixup_rt_mutex_waiters()
+ * if (wait_list_empty(l) {
+ * owner = l->owner & ~HAS_WAITERS;
+ * cmpxchg(l->owner, T1, NULL)
+ * ===> Success (l->owner = NULL)
+ *
+ * l->owner = owner
+ * ==> l->owner = T1
+ * }
+ *
+ * With the check for the waiter bit in place T3 on CPU2 will not
+ * overwrite. All tasks fiddling with the waiters bit are
+ * serialized by l->lock, so nothing else can modify the waiters
+ * bit. If the bit is set then nothing can change l->owner either
+ * so the simple RMW is safe. The cmpxchg() will simply fail if it
+ * happens in the middle of the RMW because the waiters bit is
+ * still set.
+ */
+ owner = READ_ONCE(*p);
+ if (owner & RT_MUTEX_HAS_WAITERS)
+ WRITE_ONCE(*p, owner & ~RT_MUTEX_HAS_WAITERS);
}
/*
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html