4.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baoquan He <bhe@xxxxxxxxxx>
[ Upstream commit 6df77862f63f389df3b1ad879738e04440d7385d ]
In-flight DMA from 1st kernel could continue going in kdump kernel.
New io-page table has been created before bnx2 does reset at open stage.
We have to wait for the in-flight DMA to complete to avoid it look up
into the newly created io-page table at probe stage.
Suggested-by: Michael Chan <michael.chan@xxxxxxxxxxxx>
Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
Acked-by: Michael Chan <michael.chan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/bnx2.c | 38 +++++++++++++++++++++++++++++------
1 file changed, 32 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -49,6 +49,7 @@
#include <linux/firmware.h>
#include <linux/log2.h>
#include <linux/aer.h>
+#include <linux/crash_dump.h>
#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
#define BCM_CNIC 1
@@ -4759,15 +4760,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp)
BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR);
}
-static int
-bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
+static void
+bnx2_wait_dma_complete(struct bnx2 *bp)
{
u32 val;
- int i, rc = 0;
- u8 old_port;
+ int i;
- /* Wait for the current PCI transaction to complete before
- * issuing a reset. */
+ /*
+ * Wait for the current PCI transaction to complete before
+ * issuing a reset.
+ */
if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) ||
(BNX2_CHIP(bp) == BNX2_CHIP_5708)) {
BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
@@ -4791,6 +4793,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 res
}
}
+ return;
+}
+
+
+static int
+bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
+{
+ u32 val;
+ int i, rc = 0;
+ u8 old_port;
+
+ /* Wait for the current PCI transaction to complete before
+ * issuing a reset. */
+ bnx2_wait_dma_complete(bp);
+
/* Wait for the firmware to tell us it is ok to issue a reset. */
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);
@@ -8575,6 +8592,15 @@ bnx2_init_one(struct pci_dev *pdev, cons
pci_set_drvdata(pdev, dev);
+ /*
+ * In-flight DMA from 1st kernel could continue going in kdump kernel.
+ * New io-page table has been created before bnx2 does reset at open stage.
+ * We have to wait for the in-flight DMA to complete to avoid it look up
+ * into the newly created io-page table.
+ */
+ if (is_kdump_kernel())
+ bnx2_wait_dma_complete(bp);
+
memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN);
dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html