On 11.11.2016 04:30, Gabriel C wrote:
>
> On 05.11.2016 14:29, James Bottomley wrote:
>
>
> ...
>
>> Kashyap Desai (1):
>> scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
>>
>> diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
>> index 9ff57de..d8b1fbd 100644
>> --- a/drivers/scsi/megaraid/megaraid_sas_base.c
>> +++ b/drivers/scsi/megaraid/megaraid_sas_base.c
>> @@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
>> goto out_done;
>> }
>>
>> - switch (scmd->cmnd[0]) {
>> - case SYNCHRONIZE_CACHE:
>> - /*
>> - * FW takes care of flush cache on its own
>> - * No need to send it down
>> - */
>> + /*
>> + * FW takes care of flush cache on its own for Virtual Disk.
>> + * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW.
>> + */
>> + if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) {
>> scmd->result = DID_OK << 16;
>> goto out_done;
>> - default:
>> - break;
>> }
>>
>> return instance->instancet->build_and_issue_cmd(instance, scmd);
>
> This patch breaks my box.. I'm not able to boot it anymore.
> It seems with this patch I have /dev/sda[a-z] to /dev/sdz[a-z] ?!?
>
> I'm not sure how to get an log since dracut times out and I'm dropped , after a very long time
> of probing 'ghost devices', in a emercency shell, journalctl doesn't work also..
>
> After reverting this one I can boot normal.
>
> Box is a FUJITSU PRIMERGY TX200 S5..
>
> This is from an working kernel..
>
> [ 5.119371] megaraid_sas 0000:01:00.0: FW now in Ready state
> [ 5.119418] megaraid_sas 0000:01:00.0: firmware supports msix : (0)
> [ 5.119420] megaraid_sas 0000:01:00.0: current msix/online cpus : (1/16)
> [ 5.119422] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
> [ 5.123100] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
> [ 5.123113] ehci-pci 0000:00:1a.7: irq 18, io mem 0xb0020000
>
> ...
>
> [ 5.208063] megaraid_sas 0000:01:00.0: controller type : MR(256MB)
> [ 5.208065] megaraid_sas 0000:01:00.0: Online Controller Reset(OCR) : Enabled
> [ 5.208067] megaraid_sas 0000:01:00.0: Secure JBOD support : No
> [ 5.208070] megaraid_sas 0000:01:00.0: megasas_init_mfi: fw_support_ieee=0
> [ 5.208073] megaraid_sas 0000:01:00.0: INIT adapter done
> [ 5.208075] megaraid_sas 0000:01:00.0: Jbod map is not supported megasas_setup_jbod_map 4967
> [ 5.230163] megaraid_sas 0000:01:00.0: MR_DCMD_PD_LIST_QUERY failed/not supported by firmware
> [ 5.252080] megaraid_sas 0000:01:00.0: DCMD not supported by firmware - megasas_ld_list_query 4369
> [ 5.274086] megaraid_sas 0000:01:00.0: pci id : (0x1000)/(0x0060)/(0x1734)/(0x10f9)
> [ 5.274089] megaraid_sas 0000:01:00.0: unevenspan support : no
> [ 5.274090] megaraid_sas 0000:01:00.0: firmware crash dump : no
> [ 5.274092] megaraid_sas 0000:01:00.0: jbod sync map : no
> [ 5.274094] scsi host0: Avago SAS based MegaRAID driver
> [ 5.280022] scsi 0:0:6:0: Direct-Access ATA WDC WD5002ABYS-5 3B06 PQ: 0 ANSI: 5
> [ 5.282153] scsi 0:0:7:0: Direct-Access ATA WDC WD5002ABYS-5 3B06 PQ: 0 ANSI: 5
> [ 5.285180] scsi 0:0:10:0: Direct-Access ATA ST500NM0011 FTM6 PQ: 0 ANSI: 5
> [ 5.369885] scsi 0:2:0:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5
>
> ..
>
> Please let me know if you need more infos and/or want me to test patches.
>
>
I managed to get some parts of the broken dmesg. There it is :
http://ftp.frugalware.org/pub/other/people/crazy/kernel/broken-dmesg
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html