Patch "drm/fb-helper: Keep references for the current set of used connectors" has been added to the 4.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    drm/fb-helper: Keep references for the current set of used connectors

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     drm-fb-helper-keep-references-for-the-current-set-of-used-connectors.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From a2889606636d135148de101fe3311dfea67baf1c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@xxxxxxxxxxxxxxx>
Date: Wed, 26 Oct 2016 17:41:18 +0300
Subject: drm/fb-helper: Keep references for the current set of used connectors
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

commit a2889606636d135148de101fe3311dfea67baf1c upstream.

The fbdev helper code keeps around two lists of connectors. One is the
list of all connectors it could use, and that list already holds
references for all the connectors. However the other list, or rather
lists, is the one actively being used. That list is tracked per-crtc
and currently doesn't hold any extra references. Let's grab those
extra references to avoid oopsing when the connector vanishes. The
list of all possible connectors should get updated when the hpd happens,
but the list of actively used connectors would not get updated until
the next time the fb-helper picks through the set of possible connectors.
And so we need to hang on to the connectors until that time.

Since we need to clean up in drm_fb_helper_crtc_free() as well,
let's pull the code to a common place. And while at it let's
pull in up the modeset->mode cleanup in there as well. The case
of modeset->fb is a bit less clear. I'm thinking we should probably
hold a reference to it, but for now I just slapped on a FIXME.

v2: Cleanup things drm_fb_helper_crtc_free() too (Chris)
v3: Don't leak modeset->connectors (Chris)

Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Carlos Santa <carlos.santa@xxxxxxxxx>
Cc: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx>
Tested-by: Carlos Santa <carlos.santa@xxxxxxxxx> (v1)
Tested-by: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/gpu/drm/drm_fb_helper.c |   57 +++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 24 deletions(-)

--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -631,6 +631,24 @@ int drm_fb_helper_blank(int blank, struc
 }
 EXPORT_SYMBOL(drm_fb_helper_blank);
 
+static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper,
+					  struct drm_mode_set *modeset)
+{
+	int i;
+
+	for (i = 0; i < modeset->num_connectors; i++) {
+		drm_connector_unreference(modeset->connectors[i]);
+		modeset->connectors[i] = NULL;
+	}
+	modeset->num_connectors = 0;
+
+	drm_mode_destroy(helper->dev, modeset->mode);
+	modeset->mode = NULL;
+
+	/* FIXME should hold a ref? */
+	modeset->fb = NULL;
+}
+
 static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
 {
 	int i;
@@ -638,10 +656,12 @@ static void drm_fb_helper_crtc_free(stru
 	for (i = 0; i < helper->connector_count; i++)
 		kfree(helper->connector_info[i]);
 	kfree(helper->connector_info);
+
 	for (i = 0; i < helper->crtc_count; i++) {
-		kfree(helper->crtc_info[i].mode_set.connectors);
-		if (helper->crtc_info[i].mode_set.mode)
-			drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode);
+		struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set;
+
+		drm_fb_helper_modeset_release(helper, modeset);
+		kfree(modeset->connectors);
 	}
 	kfree(helper->crtc_info);
 }
@@ -1983,7 +2003,6 @@ static void drm_setup_crtcs(struct drm_f
 	struct drm_fb_helper_crtc **crtcs;
 	struct drm_display_mode **modes;
 	struct drm_fb_offset *offsets;
-	struct drm_mode_set *modeset;
 	bool *enabled;
 	int width, height;
 	int i;
@@ -2031,45 +2050,35 @@ static void drm_setup_crtcs(struct drm_f
 
 	/* need to set the modesets up here for use later */
 	/* fill out the connector<->crtc mappings into the modesets */
-	for (i = 0; i < fb_helper->crtc_count; i++) {
-		modeset = &fb_helper->crtc_info[i].mode_set;
-		modeset->num_connectors = 0;
-		modeset->fb = NULL;
-	}
+	for (i = 0; i < fb_helper->crtc_count; i++)
+		drm_fb_helper_modeset_release(fb_helper,
+					      &fb_helper->crtc_info[i].mode_set);
 
 	for (i = 0; i < fb_helper->connector_count; i++) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
 		struct drm_fb_offset *offset = &offsets[i];
-		modeset = &fb_crtc->mode_set;
+		struct drm_mode_set *modeset = &fb_crtc->mode_set;
 
 		if (mode && fb_crtc) {
+			struct drm_connector *connector =
+				fb_helper->connector_info[i]->connector;
+
 			DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
 				      mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
+
 			fb_crtc->desired_mode = mode;
 			fb_crtc->x = offset->x;
 			fb_crtc->y = offset->y;
-			if (modeset->mode)
-				drm_mode_destroy(dev, modeset->mode);
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
-			modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector;
+			drm_connector_reference(connector);
+			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->fb = fb_helper->fb;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
 		}
 	}
-
-	/* Clear out any old modes if there are no more connected outputs. */
-	for (i = 0; i < fb_helper->crtc_count; i++) {
-		modeset = &fb_helper->crtc_info[i].mode_set;
-		if (modeset->num_connectors == 0) {
-			BUG_ON(modeset->fb);
-			if (modeset->mode)
-				drm_mode_destroy(dev, modeset->mode);
-			modeset->mode = NULL;
-		}
-	}
 out:
 	kfree(crtcs);
 	kfree(modes);


Patches currently in stable-queue which might be from ville.syrjala@xxxxxxxxxxxxxxx are

queue-4.4/usb-gadget-function-u_ether-don-t-starve-tx-request-queue.patch
queue-4.4/drm-i915-clean-up-ddi-ddc-aux-ch-sanitation.patch
queue-4.4/drm-dp-mst-check-peer-device-type-before-attempting-edid-read.patch
queue-4.4/drm-fb-helper-keep-references-for-the-current-set-of-used-connectors.patch
queue-4.4/drm-dp-mst-clear-port-pdt-when-tearing-down-the-i2c-adapter.patch
queue-4.4/drm-fb-helper-fix-connector-ref-leak-on-error.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]