FAILED: patch "[PATCH] rtl8xxxu: Fix rtl8192eu driver reload issue" failed to apply to 4.8-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.8-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 29d5e6fbd65be89dcd32f070fc45ee0e3b2f82b6 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Date: Fri, 30 Sep 2016 19:35:18 -0400
Subject: [PATCH] rtl8xxxu: Fix rtl8192eu driver reload issue

The 8192eu suffered from two issues when reloading the driver.

The same problems as with the 8723bu where REG_RX_WAIT_CCA bits 22 and
23 didn't get set in rtl8192e_enable_rf().

In addition it also seems prone to issues when setting REG_RF_CTRL to
0 intead of just disabling the RF_ENABLE bit. Similar to what was
causing issues with the 8188eu.

With this patch I can successfully reload the driver and reassociate
to an APi with an 8192eu dongle.

Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # 4.8+
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index df54d27e7851..a793fedc3654 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1461,7 +1461,9 @@ static int rtl8192eu_active_to_emu(struct rtl8xxxu_priv *priv)
 	int count, ret = 0;
 
 	/* Turn off RF */
-	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+	val8 = rtl8xxxu_read8(priv, REG_RF_CTRL);
+	val8 &= ~RF_ENABLE;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
 
 	/* Switch DPDT_SEL_P output from register 0x65[2] */
 	val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
@@ -1593,6 +1595,10 @@ static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv)
 	u32 val32;
 	u8 val8;
 
+	val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
+	val32 |= (BIT(22) | BIT(23));
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
+
 	val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
 	val8 |= BIT(5);
 	rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]