Patch "xhci: use default USB_RESUME_TIMEOUT when resuming ports." has been added to the 4.8-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    xhci: use default USB_RESUME_TIMEOUT when resuming ports.

to the 4.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     xhci-use-default-usb_resume_timeout-when-resuming-ports.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 7d3b016a6f5a0fa610dfd02b05654c08fa4ae514 Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Date: Thu, 20 Oct 2016 18:09:20 +0300
Subject: xhci: use default USB_RESUME_TIMEOUT when resuming ports.

From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>

commit 7d3b016a6f5a0fa610dfd02b05654c08fa4ae514 upstream.

USB2 host inititated resume, and system suspend bus resume
need to use the same USB_RESUME_TIMEOUT as elsewhere.

This resolves a device disconnect issue at system resume seen
on Intel Braswell and Apollolake, but is in no way limited to
those platforms.

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/host/xhci-hub.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1166,7 +1166,7 @@ int xhci_hub_control(struct usb_hcd *hcd
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_RESUME);
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				msleep(20);
+				msleep(USB_RESUME_TIMEOUT);
 				spin_lock_irqsave(&xhci->lock, flags);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_U0);
@@ -1410,7 +1410,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 
 	if (need_usb2_u3_exit) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irqsave(&xhci->lock, flags);
 	}
 


Patches currently in stable-queue which might be from mathias.nyman@xxxxxxxxxxxxxxx are

queue-4.8/xhci-use-default-usb_resume_timeout-when-resuming-ports.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]