From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter <daniel@xxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Cc: Carlos Santa <carlos.santa@xxxxxxxxx> Cc: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx> Tested-by: Carlos Santa <carlos.santa@xxxxxxxxx> (v1) Tested-by: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/drm_dp_mst_topology.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 04e457117980..ba13f9d8720b 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -914,6 +914,7 @@ static void drm_dp_destroy_port(struct kref *kref) /* no need to clean up vcpi * as if we have no connector we never setup a vcpi */ drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; } kfree(port); } @@ -2919,6 +2920,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work) mgr->cbs->destroy_connector(mgr, port->connector); drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; if (!port->input && port->vcpi.vcpi > 0) { drm_dp_mst_reset_vcpi_slots(mgr, port); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html