For SRIOV enabled firmware, if there is a OCR(online controller reset) possibility driver set the convert flag to 1, which is not happening if there are outstanding commands even after 180 seconds. As driver does not set convert flag to 1 and still making the OCR to run, VF(Virtual function) driver is directly writing on to the register instead of waiting for 30 seconds. Setting convert flag to 1 will cause VF driver will wait for 30 secs before going for reset. CC: stable@xxxxxxxxxxxxxxx Signed-off-by: Kiran Kumar Kasturi <kiran-kumar.kasturi@xxxxxxxxxxxx> Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxxx> Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index ec83754..0de7de3 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2823,6 +2823,7 @@ int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance, dev_err(&instance->pdev->dev, "pending commands remain after waiting, " "will reset adapter scsi%d.\n", instance->host->host_no); + *convert = 1; retval = 1; } out: -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html