[ 29/72] xen/pcifront: Deal with toolstack missing XenbusStateClosing state.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>

commit 098b1aeaf4d6149953b8f1f8d55c21d85536fbff upstream.

There are two tool-stack that can instruct the Xen PCI frontend
and backend to change states: 'xm' (Python code with a daemon),
and 'xl' (C library - does not keep state changes).

With the 'xm', the path to disconnect a single PCI device (xm pci-detach
<guest> <BDF>) is:

4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected)->5(Closing*).

The * is for states that the tool-stack sets. For 'xl', it is similar:

4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected)

Both of them also tear down the XenBus structure, so the backend
state ends up going in the 3(Initialised) and calls pcifront_xenbus_remove.

When a PCI device is plugged back in (xm pci-attach <guest> <BDF>)
both of them follow the same pattern:

2(InitWait*), 3(Initialized*), 4(Connected*)->4(Connected).

[xen-pcifront ignores the 2,3 state changes and only acts when
4 (Connected) has been reached]

Note that this is for a _single_ PCI device. If there were two
PCI devices and only one was disconnected 'xm' would show the same
state changes.

The problem is that git commit 3d925320e9e2de162bd138bf97816bda8c3f71be
("xen/pcifront: Use Xen-SWIOTLB when initting if required") introduced
a mechanism to initialize the SWIOTLB when the Xen PCI front moves to
Connected state. It also had some aggressive seatbelt code check that
would warn the user if one tried to change to Connected state without
hitting first the Closing state:

 pcifront pci-0: PCI frontend already installed!

However, that code can be relaxed and we can continue on working
even if the frontend is instructed to be the 'Connected' state with
no devices and then gets tickled to be in 'Connected' state again.

In other words, this 4(Connected)->5(Closing)->4(Connected) state
was expected, while 4(Connected)->.... anything but 5(Closing)->4(Connected)
was not. This patch removes that aggressive check and allows
Xen pcifront to work with the 'xl' toolstack (for one or more
PCI devices) and with 'xm' toolstack (for more than two PCI
devices).

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: linux-pci@xxxxxxxxxxxxxxx
[v2: Added in the description about two PCI devices]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/pci/xen-pcifront.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -678,10 +678,9 @@ static int pcifront_connect_and_init_dma
 	if (!pcifront_dev) {
 		dev_info(&pdev->xdev->dev, "Installing PCI frontend\n");
 		pcifront_dev = pdev;
-	} else {
-		dev_err(&pdev->xdev->dev, "PCI frontend already installed!\n");
+	} else
 		err = -EEXIST;
-	}
+
 	spin_unlock(&pcifront_dev_lock);
 
 	if (!err && !swiotlb_nr_tbl()) {
@@ -848,7 +847,7 @@ static int pcifront_try_connect(struct p
 		goto out;
 
 	err = pcifront_connect_and_init_dma(pdev);
-	if (err) {
+	if (err && err != -EEXIST) {
 		xenbus_dev_fatal(pdev->xdev, err,
 				 "Error setting up PCI Frontend");
 		goto out;


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]