On Thu, Oct 13, 2016 at 09:29:30PM +0300, Ville Syrjälä wrote: > On Thu, Oct 13, 2016 at 11:06:55AM -0700, Jim Bride wrote: > > On Tue, Oct 11, 2016 at 08:52:46PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote: > > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > > > > The VBT provides the platform a way to mix and match the DDI ports vs. > > > GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose > > > has no standard GMBUS pin assignment. However, there are machines out > > > there that use a non-standard mapping for the other ports as well. > > > Let's start trusting the VBT on this one for all ports on DDI platforms. > > > > > > I've structured the code such that other platforms could easily start > > > using this as well, by simply filling in the ddi_port_info. IIRC there > > > may be CHV system that might actually need this. > > > > > > v2: Include a commit message, include a debug message during init > > > > > > Cc: stable@xxxxxxxxxxxxxxx > > > Cc: Maarten Maathuis <madman2003@xxxxxxxxx> > > > Tested-by: Maarten Maatt show huis <madman2003@xxxxxxxxx> > > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 > > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > --- > > > drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++++++----------------- > > > 1 file changed, 48 insertions(+), 36 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > > > index 8d46f5836746..9ca86e901fc8 100644 > > > --- a/drivers/gpu/drm/i915/intel_hdmi.c > > > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > > > @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c > > > intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; > > > } > > > > > > +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, > > > + enum port port) > > > +{ > > > + const struct ddi_vbt_port_info *info = > > > + &dev_priv->vbt.ddi_port_info[port]; > > > + u8 ddc_pin; > > > + > > > + if (info->alternate_ddc_pin) { > > > + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", > > > + info->alternate_ddc_pin, port_name(port)); > > > + return info->alternate_ddc_pin; > > > + } > > > + > > > + switch (port) { > > > + case PORT_B: > > > + if (IS_BROXTON(dev_priv)) > > > + ddc_pin = GMBUS_PIN_1_BXT; > > > + else > > > + ddc_pin = GMBUS_PIN_DPB; > > > + break; > > > + case PORT_C: > > > + if (IS_BROXTON(dev_priv)) > > > + ddc_pin = GMBUS_PIN_2_BXT; > > > + else > > > + ddc_pin = GMBUS_PIN_DPC; > > > + break; > > > + case PORT_D: > > > + if (IS_CHERRYVIEW(dev_priv)) > > > + ddc_pin = GMBUS_PIN_DPD_CHV; > > > + else > > > + ddc_pin = GMBUS_PIN_DPD; > > > > In the code removed below there's a specific case covering Broxton that > > isn't accounted for here. Are we sure that we don't need that logic here? > > Yeah, BXT doesn't have port D. > > I guess we could split this up into a few platform specific functions that > could then have the MISSING_CASE() for the impossible ports. A bit like > the AUX ctl/data register setup functions we have. Do pople want that > level of paranoia here? tbh seems overkill, we should go boom in the platform gmbus code if you end up with an impossible port. -Daniel > > > > > Jim > > > > > + break; > > > + default: > > > + MISSING_CASE(port); > > > + ddc_pin = GMBUS_PIN_DPB; > > > + break; > > > + } > > > + > > > + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", > > > + ddc_pin, port_name(port)); > > > + > > > + return ddc_pin; > > > +} > > > + > > > void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, > > > struct intel_connector *intel_connector) > > > { > > > @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, > > > struct drm_device *dev = intel_encoder->base.dev; > > > struct drm_i915_private *dev_priv = to_i915(dev); > > > enum port port = intel_dig_port->port; > > > - uint8_t alternate_ddc_pin; > > > > > > DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", > > > port_name(port)); > > > @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, > > > connector->doublescan_allowed = 0; > > > connector->stereo_allowed = 1; > > > > > > + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); > > > + > > > switch (port) { > > > case PORT_B: > > > - if (IS_BROXTON(dev_priv)) > > > - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; > > > - else > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; > > > /* > > > * On BXT A0/A1, sw needs to activate DDIA HPD logic and > > > * interrupts to check the external panel connection. > > > @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, > > > intel_encoder->hpd_pin = HPD_PORT_B; > > > break; > > > case PORT_C: > > > - if (IS_BROXTON(dev_priv)) > > > - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; > > > - else > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; > > > intel_encoder->hpd_pin = HPD_PORT_C; > > > break; > > > case PORT_D: > > > - if (WARN_ON(IS_BROXTON(dev_priv))) > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; > > > - else if (IS_CHERRYVIEW(dev_priv)) > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; > > > - else > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; > > > intel_encoder->hpd_pin = HPD_PORT_D; > > > break; > > > case PORT_E: > > > - /* On SKL PORT E doesn't have seperate GMBUS pin > > > - * We rely on VBT to set a proper alternate GMBUS pin. */ > > > - alternate_ddc_pin = > > > - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; > > > - switch (alternate_ddc_pin) { > > > - case DDC_PIN_B: > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; > > > - break; > > > - case DDC_PIN_C: > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; > > > - break; > > > - case DDC_PIN_D: > > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; > > > - break; > > > - default: > > > - MISSING_CASE(alternate_ddc_pin); > > > - } > > > intel_encoder->hpd_pin = HPD_PORT_E; > > > break; > > > - case PORT_A: > > > - intel_encoder->hpd_pin = HPD_PORT_A; > > > - /* Internal port only for eDP. */ > > > default: > > > - BUG(); > > > + MISSING_CASE(port); > > > + return; > > > } > > > > > > if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { > > > -- > > > 2.7.4 > > > > > > _______________________________________________ > > > Intel-gfx mailing list > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Ville Syrjälä > Intel OTC > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html