4.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
commit c488f0071eacd10a290df4fb34bbdeb4eb8e7888 upstream.
The voltage ranges listed here are wrong. The pma8084 pldo
supports three different overlapping voltage ranges with
differing step sizes and the pma8084 ftsmps supports two. These
ranges can be seen in the "native" spmi regulator driver
(qcom_spmi-regulator.c) at pldo_ranges[] and ftsmps_ranges[]
respectively. Port these ranges over to the RPM SMD regulator
driver so that we list the appropriate set of supported voltages
on these types of regulators.
Fixes: ee01d0c91ef1 ("regulator: qcom-smd: Add support for PMA8084")
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/qcom_smd-regulator.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -178,20 +178,21 @@ static const struct regulator_desc pma80
static const struct regulator_desc pma8084_ftsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000),
- REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+ REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
},
.n_linear_ranges = 2,
- .n_voltages = 340,
+ .n_voltages = 262,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pma8084_pldo = {
.linear_ranges = (struct regulator_linear_range[]) {
- REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000),
- REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
},
- .n_linear_ranges = 2,
- .n_voltages = 100,
+ .n_linear_ranges = 3,
+ .n_voltages = 164,
.ops = &rpm_smps_ldo_ops,
};
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html