This is a note to let you know that I've just added the patch titled
iio: accel: bmc150: reset chip at init time
to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-accel-bmc150-reset-chip-at-init-time.patch
and it can be found in the queue-4.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 1c500840934a138bd6b13556c210516e9301fbee Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@xxxxxxxxx>
Date: Thu, 25 Aug 2016 09:45:33 -0700
Subject: iio: accel: bmc150: reset chip at init time
From: Olof Johansson <olof@xxxxxxxxx>
commit 1c500840934a138bd6b13556c210516e9301fbee upstream.
In at least one known setup, the chip comes up in a state where reading
the chip ID returns garbage unless it's been reset, due to noise on the
wires during system boot.
All supported chips have the same reset method, and based on the
datasheets they all need 1.3 or 1.8ms to recover after reset. So, do
the conservative thing here and always reset the chip.
Signed-off-by: Olof Johansson <olof@xxxxxxxxx>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/accel/bmc150-accel-core.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -67,6 +67,9 @@
#define BMC150_ACCEL_REG_PMU_BW 0x10
#define BMC150_ACCEL_DEF_BW 125
+#define BMC150_ACCEL_REG_RESET 0x14
+#define BMC150_ACCEL_RESET_VAL 0xB6
+
#define BMC150_ACCEL_REG_INT_MAP_0 0x19
#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2)
@@ -1497,6 +1500,14 @@ static int bmc150_accel_chip_init(struct
int ret, i;
unsigned int val;
+ /*
+ * Reset chip to get it in a known good state. A delay of 1.8ms after
+ * reset is required according to the data sheets of supported chips.
+ */
+ regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
+ BMC150_ACCEL_RESET_VAL);
+ usleep_range(1800, 2500);
+
ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(dev, "Error: Reading chip id\n");
Patches currently in stable-queue which might be from olof@xxxxxxxxx are
queue-4.7/iio-accel-bmc150-reset-chip-at-init-time.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html