[PATCH 2/5] mmc: core: switch to 1V8 or 1V2 for hs400es mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When introducing hs400es, I didn't notice that we haven't
switched voltage to 1V2 or 1V8 for it. That happens to work
as the first controller claiming to support hs400es, arasan(5.1),
which is designed to only support 1V8. So the voltage is fixed to 1V8.
But it actually is wrong, and will not fit for other host controllers.
Let's fix it.

Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Cc: <stable@xxxxxxxxxxxxxxx> 4.4# +
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---

 drivers/mmc/core/mmc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3486bc7..3163bb9 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card)
 		goto out_err;
 	}
 
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+
+	if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+
+	/* If fails try again during next card power cycle */
+	if (err)
+		goto out_err;
+
 	err = mmc_select_bus_width(card);
 	if (err < 0)
 		goto out_err;
-- 
2.3.7


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]