This is an automatic generated email to let you know that the following patch were queued:
Subject: [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid
Author: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
Date: Sun Sep 4 10:06:39 2016 -0300
This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.
The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +-
drivers/media/usb/cx231xx/cx231xx-core.c | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
---
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index c63248a18823..72c246bfaa1c 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -486,7 +486,7 @@ struct cx231xx_board cx231xx_boards[] = {
.output_mode = OUT_MODE_VIP11,
.demod_xfer_mode = 0,
.ctl_pin_status_mask = 0xFFFFFFC4,
- .agc_analog_digital_select_gpio = 0x00, /* According with PV cxPolaris.inf file */
+ .agc_analog_digital_select_gpio = 0x1c,
.tuner_sif_gpio = -1,
.tuner_scl_gpio = -1,
.tuner_sda_gpio = -1,
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 7e4319172e46..97730cb2f591 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -712,6 +712,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
break;
case CX231XX_BOARD_CNXT_RDE_253S:
case CX231XX_BOARD_CNXT_RDU_253S:
+ case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
break;
case CX231XX_BOARD_HAUPPAUGE_EXETER:
@@ -738,7 +739,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
- errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
+ errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
break;
default:
break;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html