On 08/26/2016 08:31 AM, Andy Lutomirski wrote:
On Aug 25, 2016 4:20 PM, "Jens Axboe" <axboe@xxxxxx> wrote:
On 08/25/2016 01:54 AM, Andy Lutomirski wrote:
On Thu, Aug 25, 2016 at 12:38 AM, Christoph Hellwig <hch@xxxxxx> wrote:
Ooops, yes.
Are you looking into new nvme_set_features users? Another thing
we need to tackle is either replacing dma_addr argument with a
a real kernel pointer (or just kill it until users show up)
I am, and I have a patch to do the former (and to add a length
argument). But that's not -stable material.
While I have your attention: the new use is to enable APST (power
saving). In theory, it seems like I should integrate with dev_pm_qos
so that the standard interface for setting a latency limit will work,
but, on brief inspection, there are literally no drivers in the entire
tree that do this. Am I missing something? My current draft patch
just adds a sysfs attribute. (It saves a *lot* of power on my laptop,
so supporting APST is worth doing.)
Care to send out what you have? I'd be interested in seeing how much I
can save on my laptop, haven't played with APST yet.
https://git.kernel.org/cgit/linux/kernel/git/luto/linux.git/log/?h=nvme/power
There are some todos:
- Default to a nonzero latency (e.g. 7ms? My SSD needs 5.5ms for max
power saving.) To test it, write something like 7000000 to
apst_max_latency_ns.
- Add a real changelog.
- Optionally add a sysfs binfile or other interface to allow
uploading an entire custom table.
- Consider *deleting* the SCSI translation layer's power saving code.
It looks almost entirely bogus to me. It has an off-by-one in its
NPSS handling, it hardcodes power state indices which is total BS, it
ignores the distinction between operational and non-operational states
(which I think matters for non-APST usage). It also seems likely to
be that it's never been used, since it's one of the formerly
crashy-looking set_features users.
You can inspect what it's doing with something like:
# nvme get-feature -f 0x0c -H -s 0 /dev/nvme0
if you have nvme-cli installed.
Thanks, I'll give it a whirl. One issue in a previous patch - you have
nvme_set_features() take a const buffer, which makes sense. But then you
pass it to __nvme_submit_sync_cmd(), which of course takes both
read/write commands, and hence the buffer isn't const.
--
Jens Axboe
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html