The patch below does not apply to the 4.7-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 64989ca4b27acb026b6496ec21e43bee66f86a5b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@xxxxxxxxxxxxxxx>
Date: Fri, 13 May 2016 20:53:56 +0300
Subject: [PATCH] drm/i915: Refresh cached DP port register value on resume
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
During hibernation the cached DP port register value will be left with
whatever value we have there when we create the hibernation image.
Currently that means the port (and eDP PLL) will be off in the cached
value. However when we resume there is no guarantee that the value
in the actual register will match the cached value. If i915 isn't
loaded in the kernel that loads the hibernation image, the port may
well be on (eg. left on by the BIOS). The encoder state readout
does the right thing in this case and updates our encoder state
to reflect the actual hardware state. However the post-resume modeset
will then use the stale cached port register value in
intel_dp_link_down() and potentially confuse the hardware.
This was caught by the following assert
WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915]
eDP PLL state assertion failure (expected on, current off)
on account of the eDP PLL getting prematurely turned off when
shutting down the port, since the DP_PLL_ENABLE bit wasn't set
in the cached register value.
Presumably I introduced this problem in
commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
as before that we didn't update the cached value after shuttting the
port down. That's assuming the port got enabled at least once prior
to hibernating. If that didn't happen then the cached value would
still have been totally out of sync with reality (eg. first boot w/o
eDP on, then hibernate, and then resume with eDP on).
So, let's fix this properly and refresh the cached register value from
the hardware register during resume.
DDI platforms shouldn't use the cached value during port disable at
least, so shouldn't have this particular issue. They might still have
issues if we skip the initial modeset and then try to retrain the link
or something. But untangling this DP vs. DDI mess is a bigger topic,
so let's jut punt on DDI for now.
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@xxxxxxxxxxxxxxx
Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9a1a347146dd..8bb20e7048ec 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4618,13 +4618,15 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
- struct intel_dp *intel_dp;
+ struct drm_i915_private *dev_priv = to_i915(encoder->dev);
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ if (!HAS_DDI(dev_priv))
+ intel_dp->DP = I915_READ(intel_dp->output_reg);
if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP)
return;
- intel_dp = enc_to_intel_dp(encoder);
-
pps_lock(intel_dp);
/*
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html