3.16.37-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
commit 427460c83cdf55069eee49799a0caef7dde8df69 upstream.
When testing CAN write floods on Altera's CycloneV, the first 2 bytes
are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also
observed bytes 4 & 5 were corrupted in some cases.
The D_CAN Data registers are 32 bits and changing from 16 bit writes to
32 bit writes fixes the problem.
Testing performed on Altera CycloneV (D_CAN). Requesting tests on other
C_CAN & D_CAN platforms.
Reported-by: Richard Andrysek <richard.andrysek@xxxxxxxxx>
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/net/can/c_can/c_can.c | 38 +++++++++++++++++++++++++++++++-------
1 file changed, 31 insertions(+), 7 deletions(-)
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -331,9 +331,23 @@ static void c_can_setup_tx_object(struct
priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
- for (i = 0; i < frame->can_dlc; i += 2) {
- priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2,
- frame->data[i] | (frame->data[i + 1] << 8));
+ if (priv->type == BOSCH_D_CAN) {
+ u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface);
+
+ for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
+ data = (u32)frame->data[i];
+ data |= (u32)frame->data[i + 1] << 8;
+ data |= (u32)frame->data[i + 2] << 16;
+ data |= (u32)frame->data[i + 3] << 24;
+ priv->write_reg32(priv, dreg, data);
+ }
+ } else {
+ for (i = 0; i < frame->can_dlc; i += 2) {
+ priv->write_reg(priv,
+ C_CAN_IFACE(DATA1_REG, iface) + i / 2,
+ frame->data[i] |
+ (frame->data[i + 1] << 8));
+ }
}
}
@@ -401,10 +415,20 @@ static int c_can_read_msg_object(struct
} else {
int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
- for (i = 0; i < frame->can_dlc; i += 2, dreg ++) {
- data = priv->read_reg(priv, dreg);
- frame->data[i] = data;
- frame->data[i + 1] = data >> 8;
+ if (priv->type == BOSCH_D_CAN) {
+ for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
+ data = priv->read_reg32(priv, dreg);
+ frame->data[i] = data;
+ frame->data[i + 1] = data >> 8;
+ frame->data[i + 2] = data >> 16;
+ frame->data[i + 3] = data >> 24;
+ }
+ } else {
+ for (i = 0; i < frame->can_dlc; i += 2, dreg++) {
+ data = priv->read_reg(priv, dreg);
+ frame->data[i] = data;
+ frame->data[i + 1] = data >> 8;
+ }
}
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html