3.2.82-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx> commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx> Signed-off-by: Bin Liu <b-liu@xxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/usb/musb/musb_host.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1384,9 +1384,15 @@ static void musb_bulk_rx_nak_timeout(str musb_ep_select(mbase, ep->epnum); dma = is_dma_capable() ? ep->rx_channel : NULL; - /* clear nak timeout bit */ + /* + * Need to stop the transaction by clearing REQPKT first + * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED + * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2 + */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html