The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.
So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.
Cc: stable@xxxxxxxxxxxxxxx
Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Björn Andersson <bjorn.andersson@xxxxxxxxxx>
Reported-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Lee: this patch goes on top of the previous patch I sent:
"mfd: qcom_rpm: fix offset error for msm8660"
You can also squash them, if you prefer.
---
drivers/mfd/qcom_rpm.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 9364f88264e5..880d4699bcb0 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -39,7 +39,8 @@ struct qcom_rpm_data {
unsigned int req_sel_off;
unsigned int ack_ctx_off;
unsigned int ack_sel_off;
- unsigned int sel_size;
+ unsigned int req_sel_size;
+ unsigned int ack_sel_size;
};
struct qcom_rpm {
@@ -162,7 +163,8 @@ static const struct qcom_rpm_data apq8064_template = {
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
@@ -250,7 +252,8 @@ static const struct qcom_rpm_data msm8660_template = {
.req_sel_off = 11,
.ack_ctx_off = 19,
.ack_sel_off = 27,
- .sel_size = 7,
+ .req_sel_size = 7,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
@@ -337,7 +340,8 @@ static const struct qcom_rpm_data msm8960_template = {
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
@@ -382,7 +386,8 @@ static const struct qcom_rpm_data ipq806x_template = {
.req_sel_off = 11,
.ack_ctx_off = 15,
.ack_sel_off = 23,
- .sel_size = 4,
+ .req_sel_size = 4,
+ .ack_sel_size = 7,
};
static const struct of_device_id qcom_rpm_of_match[] = {
@@ -419,7 +424,7 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
- for (i = 0; i < rpm->data->sel_size; i++) {
+ for (i = 0; i < rpm->data->req_sel_size; i++) {
writel_relaxed(sel_mask[i],
RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
}
@@ -448,7 +453,7 @@ static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
int i;
ack = readl_relaxed(RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
- for (i = 0; i < rpm->data->sel_size; i++)
+ for (i = 0; i < rpm->data->ack_sel_size; i++)
writel_relaxed(0,
RPM_CTRL_REG(rpm, rpm->data->ack_sel_off + i));
writel(0, RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html