recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.
In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Jörg Pfähler <pfaehler@xxxxxxx>
Signed-off-by: Richard Weinberger <richard@xxxxxx>
---
drivers/mtd/ubi/eba.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 5780dd1..b6b0714 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -575,6 +575,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0;
struct ubi_volume *vol = ubi->volumes[idx];
struct ubi_vid_hdr *vid_hdr;
+ uint32_t crc;
vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
if (!vid_hdr)
@@ -599,14 +600,8 @@ retry:
goto out_put;
}
- vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
- err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
- if (err) {
- up_read(&ubi->fm_eba_sem);
- goto write_error;
- }
+ ubi_assert(vid_hdr->vol_type == UBI_VID_DYNAMIC);
- data_size = offset + len;
mutex_lock(&ubi->buf_mutex);
memset(ubi->peb_buf + offset, 0xFF, len);
@@ -621,6 +616,18 @@ retry:
memcpy(ubi->peb_buf + offset, buf, len);
+ data_size = offset + len;
+ crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
+ vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+ vid_hdr->copy_flag = 1;
+ vid_hdr->data_size = cpu_to_be32(data_size);
+ vid_hdr->data_crc = cpu_to_be32(crc);
+ err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
+ if (err) {
+ up_read(&ubi->fm_eba_sem);
+ goto out_unlock;
+ }
+
err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
if (err) {
mutex_unlock(&ubi->buf_mutex);
--
2.7.3
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html