[PATCH 3.16 005/114] ARM: OMAP2+: Only write the sysconfig on idle when necessary

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.16.36-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Hunter <jon-hunter@xxxxxx>

commit 127500ccb766f0e963436e25ddd57be8f1695498 upstream.

Currently, whenever we idle a device _idle_sysc() is called and writes to the
devices SYSCONFIG register to set the idle mode. A lot devices are using the
smart-idle mode and so the write to the SYSCONFIG register is programming the
same value that is already stored in the register.

Writes to the devices SYSCONFIG register can be slow, for example, writing to
the DMTIMER SYSCONFIG register takes 3 interface clock cycles and 3 functional
clock cycles. If the DMTIMER is using the slow 32kHz functional clock this can
take ~100us.

Furthermore, during boot on an OMAP4430 panda board, I see that there are 100
calls to _idle_sysc(), however, only 3 out of the 100 calls actually write
the SYSCONFIG register with a new value.

Therefore, to avoid unnecessary writes to device SYSCONFIG registers when
idling the device, only write the value if the value has changed. It should be
safe to do this on idle as the context of the register will never be lost while
the device is active.

Verified that suspend, CORE off and retention states are working with this
change on OMAP3430 Beagle board.

Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
[paul@xxxxxxxxx: updated to apply]
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/omap_hwmod.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1946,7 +1946,9 @@ static int _ocp_softreset(struct omap_hw
 	if (ret)
 		goto dis_opt_clks;
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]