On Thu, Jul 04, 2013 at 11:27:16AM +0200, Uwe Kleine-König wrote: > Hi Greg, > > On Fri, Jun 28, 2013 at 11:49:41AM +0200, Uwe Kleine-König wrote: > > Without this patch the driver waits ~1 ms for the UART to become idle. At > > 115200n8 this time is (theoretically) enough to transfer 11.5 characters > > (= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size > > of 16 characters the clock is gated too early. The problem is worse for > > lower baud rates. > > > > This only happens to really shut down the transmitter in the middle of a > > transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but > > was at least once (because the bootloader doesn't disable the transmitter). > > > > So increase the timeout to 20 ms which should be enough for 9600n8, too. > > Moreover skip gating the clock if the timeout is elapsed. > > > > Cc: stable@xxxxxxxxxxxxxxx # v2.6.39+ > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> > Any comments on this. I hoped this patch would make it in for 3.10 :-( You sent it after my tree closed for 3.11, 3.10 is a stretch :) I'll look at it after the 3.11-rc1 merge window is closed, give me a chance, I'm a bit busy for the next week or so with the fallout of that... thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html