This is a note to let you know that I've just added the patch titled
ARM: mvebu: fix GPIO config on the Linksys boards
to the 4.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-mvebu-fix-gpio-config-on-the-linksys-boards.patch
and it can be found in the queue-4.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 9800917cf92f5b5fe5cae706cb70db8d014f663c Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@xxxxxxxxxxx>
Date: Fri, 31 Jul 2015 20:42:00 +0200
Subject: ARM: mvebu: fix GPIO config on the Linksys boards
From: Imre Kaloz <kaloz@xxxxxxxxxxx>
commit 9800917cf92f5b5fe5cae706cb70db8d014f663c upstream.
Some of the GPIO configs were wrong in the submitted DTS files,
this patch fixes all affected boards.
Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-385-linksys.dtsi | 6 +++---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -245,7 +245,7 @@
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@@ -260,7 +260,7 @@
};
sata {
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
@@ -313,7 +313,7 @@
&pinctrl {
keys_pin: keys-pin {
- marvell,pins = "mpp24", "mpp47";
+ marvell,pins = "mpp24", "mpp29";
marvell,function = "gpio";
};
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -304,13 +304,13 @@
button@1 {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};
Patches currently in stable-queue which might be from kaloz@xxxxxxxxxxx are
queue-4.6/arm-mvebu-fix-gpio-config-on-the-linksys-boards.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html