This is a note to let you know that I've just added the patch titled
ath10k: fix firmware assert in monitor mode
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ath10k-fix-firmware-assert-in-monitor-mode.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 8a75fc54745fd3ce9062ab1cc6429a9da9ac2a68 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
Date: Wed, 2 Mar 2016 20:13:52 +0530
Subject: ath10k: fix firmware assert in monitor mode
From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
commit 8a75fc54745fd3ce9062ab1cc6429a9da9ac2a68 upstream.
commit 166de3f1895d ("ath10k: remove supported chain mask") had revealed
an issue on monitor mode. Configuring NSS upon monitor interface
creation is causing target assert in all qca9888x and qca6174 firmware.
Firmware assert issue can be reproduced by below sequence even after
reverting commit 166de3f1895d ("ath10k: remove supported chain mask").
ip link set wlan0 down
iw wlan0 set type monitor
iw phy0 set antenna 7
ip link set wlan0 up
This issue is originally reported on qca9888 with 10.1 firmware.
Fixes: 5572a95b4b ("ath10k: apply chainmask settings to vdev on creation")
Reported-by: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx>
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4456,7 +4456,10 @@ static int ath10k_add_interface(struct i
goto err_vdev_delete;
}
- if (ar->cfg_tx_chainmask) {
+ /* Configuring number of spatial stream for monitor interface is causing
+ * target assert in qca9888 and qca6174.
+ */
+ if (ar->cfg_tx_chainmask && (vif->type != NL80211_IFTYPE_MONITOR)) {
u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
vdev_param = ar->wmi.vdev_param->nss;
Patches currently in stable-queue which might be from rmanohar@xxxxxxxxxxxxxxxx are
queue-4.4/ath10k-fix-firmware-assert-in-monitor-mode.patch
queue-4.4/ath10k-fix-rx_channel-during-hw-reconfigure.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html