Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the FSL DCU driver uses MMIO, the regmap bus of type
regmap_mmio is being used which has fast_io set to true.
Use flat regmap cache and specify max register to be large
enouth to cover all registers available in LS1021a and Vybrids
register space.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
While regmap cache is used for suspend/resume only (which is
broken in its current state) Mark noted that using the RB regmap
cache can also cause issues during initialization of the driver.
This patch migrates to flat regmap cache (which we can also use
to fix the issue in stable kernels), and yet another patchset
moves to the atomic suspend/resume helpers (which will not go
into stable...)
Dave, I saw that you just sent out the pull for rc2, will send
a pull request for rc3 early next week...
--
Stefan
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 0ec1ad9..dc723f7 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -42,9 +42,10 @@ static const struct regmap_config fsl_dcu_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .cache_type = REGCACHE_RBTREE,
+ .cache_type = REGCACHE_FLAT,
.volatile_reg = fsl_dcu_drm_is_volatile_reg,
+ .max_register = 0x11fc,
};
static int fsl_dcu_drm_irq_init(struct drm_device *dev)
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html