[added to the 4.1 stable tree] hwmon: (ads7828) Enable internal reference

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Akshay Bhat <akshay.bhat@xxxxxxxxxxx>

This patch has been added to the 4.1 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit 7a18afe8097731b8ffb6cb5b2b3b418ded77c105 ]

On ads7828 the internal reference defaults to off upon power up. When
using internal reference, it needs to be turned on and the voltage needs
to settle before normal conversion cycle can be started. Hence perform a
dummy read in the probe to enable the internal reference allowing the
voltage to settle before performing a normal read.

Without this fix, the first read from the ADC when using internal
reference always returns incorrect data.

Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v4.1+
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sasha.levin@xxxxxxxxxx>
---
 drivers/hwmon/ads7828.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 6c99ee7..ee396ff 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -120,6 +120,7 @@ static int ads7828_probe(struct i2c_client *client,
 	unsigned int vref_mv = ADS7828_INT_VREF_MV;
 	bool diff_input = false;
 	bool ext_vref = false;
+	unsigned int regval;
 
 	data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
 	if (!data)
@@ -154,6 +155,15 @@ static int ads7828_probe(struct i2c_client *client,
 	if (!diff_input)
 		data->cmd_byte |= ADS7828_CMD_SD_SE;
 
+	/*
+	 * Datasheet specifies internal reference voltage is disabled by
+	 * default. The internal reference voltage needs to be enabled and
+	 * voltage needs to settle before getting valid ADC data. So perform a
+	 * dummy read to enable the internal reference voltage.
+	 */
+	if (!ext_vref)
+		regmap_read(data->regmap, data->cmd_byte, &regval);
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data,
 							   ads7828_groups);
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]