4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <catalin.marinas@xxxxxxx>
commit 66dbd6e61a526ae7d11a208238ae2c17e5cacb6b upstream.
When hardware updates of the access and dirty states are enabled, the
default ptep_set_access_flags() implementation based on calling
set_pte_at() directly is potentially racy. This triggers the "racy dirty
state clearing" warning in set_pte_at() because an existing writable PTE
is overridden with a clean entry.
There are two main scenarios for this situation:
1. The CPU getting an access fault does not support hardware updates of
the access/dirty flags. However, a different agent in the system
(e.g. SMMU) can do this, therefore overriding a writable entry with a
clean one could potentially lose the automatically updated dirty
status
2. A more complex situation is possible when all CPUs support hardware
AF/DBM:
a) Initial state: shareable + writable vma and pte_none(pte)
b) Read fault taken by two threads of the same process on different
CPUs
c) CPU0 takes the mmap_sem and proceeds to handling the fault. It
eventually reaches do_set_pte() which sets a writable + clean pte.
CPU0 releases the mmap_sem
d) CPU1 acquires the mmap_sem and proceeds to handle_pte_fault(). The
pte entry it reads is present, writable and clean and it continues
to pte_mkyoung()
e) CPU1 calls ptep_set_access_flags()
If between (d) and (e) the hardware (another CPU) updates the dirty
state (clears PTE_RDONLY), CPU1 will override the PTR_RDONLY bit
marking the entry clean again.
This patch implements an arm64-specific ptep_set_access_flags() function
to perform an atomic update of the PTE flags.
Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits")
Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Reported-by: Ming Lei <tom.leiming@xxxxxxxxx>
Tested-by: Julien Grall <julien.grall@xxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
[will: reworded comment]
Signed-off-by: Will Deacon <will.deacon@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm64/include/asm/pgtable.h | 5 +++
arch/arm64/mm/fault.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -547,6 +547,11 @@ static inline pmd_t pmd_modify(pmd_t pmd
}
#ifdef CONFIG_ARM64_HW_AFDBM
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep,
+ pte_t entry, int dirty);
+
/*
* Atomic pte/pmd modifications.
*/
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -81,6 +81,56 @@ void show_pte(struct mm_struct *mm, unsi
printk("\n");
}
+#ifdef CONFIG_ARM64_HW_AFDBM
+/*
+ * This function sets the access flags (dirty, accessed), as well as write
+ * permission, and only to a more permissive setting.
+ *
+ * It needs to cope with hardware update of the accessed/dirty state by other
+ * agents in the system and can safely skip the __sync_icache_dcache() call as,
+ * like set_pte_at(), the PTE is never changed from no-exec to exec here.
+ *
+ * Returns whether or not the PTE actually changed.
+ */
+int ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep,
+ pte_t entry, int dirty)
+{
+ pteval_t old_pteval;
+ unsigned int tmp;
+
+ if (pte_same(*ptep, entry))
+ return 0;
+
+ /* only preserve the access flags and write permission */
+ pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY;
+
+ /*
+ * PTE_RDONLY is cleared by default in the asm below, so set it in
+ * back if necessary (read-only or clean PTE).
+ */
+ if (!pte_write(entry) || !dirty)
+ pte_val(entry) |= PTE_RDONLY;
+
+ /*
+ * Setting the flags must be done atomically to avoid racing with the
+ * hardware update of the access/dirty state.
+ */
+ asm volatile("// ptep_set_access_flags\n"
+ " prfm pstl1strm, %2\n"
+ "1: ldxr %0, %2\n"
+ " and %0, %0, %3 // clear PTE_RDONLY\n"
+ " orr %0, %0, %4 // set flags\n"
+ " stxr %w1, %0, %2\n"
+ " cbnz %w1, 1b\n"
+ : "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
+ : "L" (~PTE_RDONLY), "r" (pte_val(entry)));
+
+ flush_tlb_fix_spurious_fault(vma, address);
+ return 1;
+}
+#endif
+
/*
* The kernel tried to access some page that wasn't present.
*/
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html