Hi,
On 24-05-16 14:44, James Bottomley wrote:
On Tue, 2016-05-24 at 08:53 +0200, Hans de Goede wrote:
Hi,
On 23-05-16 19:36, James Bottomley wrote:
On Mon, 2016-05-23 at 13:49 +0200, Hans de Goede wrote:
Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
level")
removed the scsi_change_queue_depth() call from
uas_slave_configure() assuming that the slave would inherit the
host's queue_depth, which that commit sets to the same value.
This is incorrect, without the scsi_change_queue_depth() call the
slave's queue_depth defaults to 1, introducing a performance
regression.
This commit restores the call, fixing the performance regression.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host
level")
Reported-by: Tom Yan <tom.ty89@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/storage/uas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/storage/uas.c
b/drivers/usb/storage/uas.c
index 16bc679..ecc7d4b 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -835,6 +835,7 @@ static int uas_slave_configure(struct
scsi_device
*sdev)
if (devinfo->flags & US_FL_BROKEN_FUA)
sdev->broken_fua = 1;
+ scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
Are you sure about this? For spinning rust, experiments imply that
the optimal queue depth per device is somewhere between 2 and 4.
Obviously that's not true for SSDs, so it depends on your use
case. Plus, for ATA NCQ devices (which I believe most UAS is
bridged to) you have a maximum NCQ depth of 31.
So this value is the same as host.can_queue, and is what uas has
always used, basically this says it is ok to queue as much as the
bridge can handle. We've seen a few rare multi-lun devices, but
typically almost all uas devices have one lun, what I really want to
do here is give a maximum and let say the sd driver lower that if it
is sub-optimal.
If that's what you actually want, you should be setting sdev
->max_queue_depth and .track_queue_depth = 1 in the template.
Hmm, I've been looking into this, but that does not seem right.
max_queue_depth is never set by drivers, it is set to sdev->queue_depth
in scsi_scan.c: scsi_add_lun() after calling the host drivers'
slave_configure callback. So it seems that the right way to set
max_queue_depth is to actually set queue_depth, or iow restore the
call to scsi_change_queue_depth() as the patch we're discussing does.
As for track_queue_depth = 1 that seems to be only set by some drivers
under drivers/scsi and is never set by any drivers under drivers/ata,
and we're almost exclusively dealing with sata disks in uas. It seems
that track_queue_depth = 1 is mostly used for iscsi and fibre channel
iow enterprise class storage stuff, so looking at existing drivers
usage of this flag using it does not seem a good idea.
Anyways this patch is a (partial) revert of a previous bug-fix patch
(which has also gone to stable) so for now I would really like to
move forward with this patch and get it upstream and in stable
to fix the performance regressions people are seeing caused by
me wrongly dropping the scsi_change_queue_depth() call.
Then if we want to tweak the queuing further we can do that
on top of this fix, and put that in next and let it get some testing
first.
So are you ok with moving this patch forward ?
Regards,
Hans
You might also need to add calls to scsi_track_queue_full() but only if
the devices aren't responding QUEUE_FULL correctly.
James
Also notice that uas is used a lot with ssd-s, that is mostly what
I want to optimize for, but it is definitely also used with spinning
rust.
And yes almost all uas devices are bridged sata devices (this may
change in the near future though, with ssd-s specifically designed
for usb-3 attachment, although sofar these all seem to use an
embbeded sata bridge), so from this pov an upper limit of 31 makes
sense, I guess, but I've not seen any bridges which actually do more
then 32 streams anyways.
Still this is a bug-fix patch, essentially a partial revert, to
address performance regressions, so lets get this out as is and take
our time to come up with some tweaks (if necessary) for the say 4.8.
There's a good reason why you don't want a queue deeper than you
can handle: it tends to interfere with writeback because you build
up a lot of pending I/O in the queue which can't be issued (it's
very similar to why bufferbloat is a problem in networks). In
theory, as long as your devices return the correct indicator
(QUEUE_FULL status), we'll handle most of this in the mid-layer by
plugging the block queue, but given what I've seen from UAS
devices, that's less than probable.
So any smart ideas how to be nicer to spinning rust, without
negatively impacting ssd-s? As said if I've to choice I think we
should chose optimizing ssd-s, as that is where uas is used a lot
(although usb attached harddisks are switching over to it too).
Note I just checked the 1TB sata/ahci harddisk in my workstation and
it is using a queue_depth of 31 too, so this really does seem like a
mid-layer problem to me.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html