shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.
Signed-off-by: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
V2 removed debugging call
drivers/usb/musb/musb_host.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 2f8ad7f..2966596 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -594,14 +594,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
- } else {
- csr = musb_readw(ep->regs, MUSB_RXCSR);
- if (csr & MUSB_RXCSR_RXPKTRDY)
- WARNING("rx%d, packet/%d ready?\n", ep->epnum,
- musb_readw(ep->regs, MUSB_RXCOUNT));
-
- musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
}
+ csr = musb_readw(ep->regs, MUSB_RXCSR);
+ if (csr & MUSB_RXCSR_RXPKTRDY)
+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+ musb_readw(ep->regs, MUSB_RXCOUNT));
+
+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html