Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/usb/musb/musb_host.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 30e0d65..777ff30 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -999,6 +999,8 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, /* clear nak timeout bit */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html