3.6.11.6 stable review patch.
If anyone has any objections, please let me know.
------------------
From: Robert Butora <robert.butora.fi@xxxxxxxxx>
[ Upstream commit 6529591e3eef65f0f528a81ac169f6e294b947a7 ]
The patch adds a new HIDCOM device and does not affect other devices
driven by the cypress_M8 module. Changes are:
- add VendorID ProductID to device tables
- skip unstable speed check because FRWD uses 115200bps
- skip reset at probe which is an issue workaround for this
particular device.
Signed-off-by: Robert Butora <robert.butora.fi@xxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
---
drivers/usb/serial/cypress_m8.c | 18 +++++++++++++++++-
drivers/usb/serial/cypress_m8.h | 4 ++++
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 61de7e1..d7a16ba 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -70,6 +70,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -83,6 +84,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -235,6 +237,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -244,6 +252,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -452,7 +464,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html