3.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Liang Li <liang.li@xxxxxxxxxxxxx> commit 384e301e3519599b000c1a2ecd938b533fc15d85 upstream. When we use pch_uart as system console like 'console=ttyPCH0,115200', then 'send break' to it. We'll encounter the deadlock on a cpu/core, with interrupts disabled on the core. When we happen to have all irqs affinity to cpu0 then the deadlock on cpu0 actually deadlock whole system. In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags) then call pch_uart_err_ir when break is received. Then the call to dev_err would actually call to pch_console_write then we'll run into another spin_lock(&priv->lock), with interrupts disabled. So in the call sequence lead by pch_uart_interrupt, we should be carefully to call functions that will 'print message to console' only in case the uart port is not being used as serial console. Signed-off-by: Liang Li <liang.li@xxxxxxxxxxxxx> Cc: Yijing Wang <wangyijing@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/pch_uart.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -935,22 +935,37 @@ static unsigned int dma_handle_tx(struct static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) { u8 fcr = ioread8(priv->membase + UART_FCR); + struct uart_port *port = &priv->port; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + char *error_msg[5] = {}; + int i = 0; /* Reset FIFO */ fcr |= UART_FCR_CLEAR_RCVR; iowrite8(fcr, priv->membase + UART_FCR); if (lsr & PCH_UART_LSR_ERR) - dev_err(&priv->pdev->dev, "Error data in FIFO\n"); + error_msg[i++] = "Error data in FIFO\n"; - if (lsr & UART_LSR_FE) - dev_err(&priv->pdev->dev, "Framing Error\n"); - - if (lsr & UART_LSR_PE) - dev_err(&priv->pdev->dev, "Parity Error\n"); - - if (lsr & UART_LSR_OE) - dev_err(&priv->pdev->dev, "Overrun Error\n"); + if (lsr & UART_LSR_FE) { + port->icount.frame++; + error_msg[i++] = " Framing Error\n"; + } + + if (lsr & UART_LSR_PE) { + port->icount.parity++; + error_msg[i++] = " Parity Error\n"; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + error_msg[i++] = " Overrun Error\n"; + } + + if (tty == NULL) { + for (i = 0; error_msg[i] != NULL; i++) + dev_err(&priv->pdev->dev, error_msg[i]); + } } static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html