[added to the 3.18 stable tree] usb: xhci: fix xhci locking up during hcd remove

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Roger Quadros <rogerq@xxxxxx>

This patch has been added to the 3.18 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit ad6b1d914a9e07f3b9a9ae3396f3c840d0070539 ]

The problem seems to be that if a new device is detected
while we have already removed the shared HCD, then many of the
xhci operations (e.g.  xhci_alloc_dev(), xhci_setup_device())
hang as command never completes.

I don't think XHCI can operate without the shared HCD as we've
already called xhci_halt() in xhci_only_stop_hcd() when shared HCD
goes away. We need to prevent new commands from being queued
not only when HCD is dying but also when HCD is halted.

The following lockup was detected while testing the otg state
machine.

[  178.199951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  178.205799] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[  178.214458] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[  178.223619] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000
[  178.230677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  178.237796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  178.245358] usb usb1: Product: xHCI Host Controller
[  178.250483] usb usb1: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd
[  178.257783] usb usb1: SerialNumber: xhci-hcd.0.auto
[  178.267014] hub 1-0:1.0: USB hub found
[  178.272108] hub 1-0:1.0: 1 port detected
[  178.278371] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  178.284171] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[  178.294038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[  178.301183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  178.308776] usb usb2: Product: xHCI Host Controller
[  178.313902] usb usb2: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd
[  178.321222] usb usb2: SerialNumber: xhci-hcd.0.auto
[  178.329061] hub 2-0:1.0: USB hub found
[  178.333126] hub 2-0:1.0: 1 port detected
[  178.567585] dwc3 48890000.usb: usb_otg_start_host 0
[  178.572707] xhci-hcd xhci-hcd.0.auto: remove, state 4
[  178.578064] usb usb2: USB disconnect, device number 1
[  178.586565] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[  178.592585] xhci-hcd xhci-hcd.0.auto: remove, state 1
[  178.597924] usb usb1: USB disconnect, device number 1
[  178.603248] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[  190.597337] INFO: task kworker/u4:0:6 blocked for more than 10 seconds.
[  190.604273]       Not tainted 4.0.0-rc1-00024-g6111320 #1058
[  190.610228] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  190.618443] kworker/u4:0    D c05c0ac0     0     6      2 0x00000000
[  190.625120] Workqueue: usb_otg usb_otg_work
[  190.629533] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98)
[  190.636915] [<c05c10ac>] (schedule) from [<c05c1318>] (schedule_preempt_disabled+0xc/0x10)
[  190.645591] [<c05c1318>] (schedule_preempt_disabled) from [<c05c23d0>] (mutex_lock_nested+0x1ac/0x3fc)
[  190.655353] [<c05c23d0>] (mutex_lock_nested) from [<c046cf8c>] (usb_disconnect+0x3c/0x208)
[  190.664043] [<c046cf8c>] (usb_disconnect) from [<c0470cf0>] (_usb_remove_hcd+0x98/0x1d8)
[  190.672535] [<c0470cf0>] (_usb_remove_hcd) from [<c0485da8>] (usb_otg_start_host+0x50/0xf4)
[  190.681299] [<c0485da8>] (usb_otg_start_host) from [<c04849a4>] (otg_set_protocol+0x5c/0xd0)
[  190.690153] [<c04849a4>] (otg_set_protocol) from [<c0484b88>] (otg_set_state+0x170/0xbfc)
[  190.698735] [<c0484b88>] (otg_set_state) from [<c0485740>] (otg_statemachine+0x12c/0x470)
[  190.707326] [<c0485740>] (otg_statemachine) from [<c0053c84>] (process_one_work+0x1b4/0x4a0)
[  190.716162] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c)
[  190.724742] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0)
[  190.732328] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24)
[  190.739898] 5 locks held by kworker/u4:0/6:
[  190.744274]  #0:  ("%s""usb_otg"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.752799]  #1:  ((&otgd->work)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.761326]  #2:  (&otgd->fsm.lock){+.+.+.}, at: [<c048562c>] otg_statemachine+0x18/0x470
[  190.769934]  #3:  (usb_bus_list_lock){+.+.+.}, at: [<c0470ce8>] _usb_remove_hcd+0x90/0x1d8
[  190.778635]  #4:  (&dev->mutex){......}, at: [<c046cf8c>] usb_disconnect+0x3c/0x208
[  190.786700] INFO: task kworker/1:0:14 blocked for more than 10 seconds.
[  190.793633]       Not tainted 4.0.0-rc1-00024-g6111320 #1058
[  190.799567] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  190.807783] kworker/1:0     D c05c0ac0     0    14      2 0x00000000
[  190.814457] Workqueue: usb_hub_wq hub_event
[  190.818866] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98)
[  190.826252] [<c05c10ac>] (schedule) from [<c05c4e40>] (schedule_timeout+0x13c/0x1ec)
[  190.834377] [<c05c4e40>] (schedule_timeout) from [<c05c19f0>] (wait_for_common+0xbc/0x150)
[  190.843062] [<c05c19f0>] (wait_for_common) from [<bf068a3c>] (xhci_setup_device+0x164/0x5cc [xhci_hcd])
[  190.852986] [<bf068a3c>] (xhci_setup_device [xhci_hcd]) from [<c046b7f4>] (hub_port_init+0x3f4/0xb10)
[  190.862667] [<c046b7f4>] (hub_port_init) from [<c046eb64>] (hub_event+0x704/0x1018)
[  190.870704] [<c046eb64>] (hub_event) from [<c0053c84>] (process_one_work+0x1b4/0x4a0)
[  190.878919] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c)
[  190.887503] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0)
[  190.895076] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24)
[  190.902650] 5 locks held by kworker/1:0/14:
[  190.907023]  #0:  ("usb_hub_wq"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.915454]  #1:  ((&hub->events)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.924070]  #2:  (&dev->mutex){......}, at: [<c046e490>] hub_event+0x30/0x1018
[  190.931768]  #3:  (&port_dev->status_lock){+.+.+.}, at: [<c046eb50>] hub_event+0x6f0/0x1018
[  190.940558]  #4:  (&bus->usb_address0_mutex){+.+.+.}, at: [<c046b458>] hub_port_init+0x58/0xb10

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sasha.levin@xxxxxxxxxx>
---
 drivers/usb/host/xhci-ring.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e5fb8c..32c9696 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3840,8 +3840,11 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 {
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
 	int ret;
-	if (xhci->xhc_state & XHCI_STATE_DYING)
+
+	if (xhci->xhc_state) {
+		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
 		return -ESHUTDOWN;
+	}
 
 	if (!command_must_succeed)
 		reserved_trbs++;
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]