From: Yijing Wang <wangyijing@xxxxxxxxxx>
This patch has been added to the 3.18 stable tree. If you have any
objections, please let us know.
===============
[ Upstream commit d0751b98dfa391f862e02dc36a233a54615e3f1d ]
A PCIe Port is an interface to a Link. A Root Port is a PCI-PCI bridge in
a Root Complex and has a Link on its secondary (downstream) side. For
other Ports, the Link may be on either the upstream (closer to the Root
Complex) or downstream side of the Port.
The usual topology has a Root Port connected to an Upstream Port. We
previously assumed this was the only possible topology, and that a
Downstream Port's Link was always on its downstream side, like this:
+---------------------+
+------+ | Downstream |
| Root | | Upstream Port +--Link--
| Port +--Link--+ Port |
+------+ | Downstream |
| Port +--Link--
+---------------------+
But systems do exist (see URL below) where the Root Port is connected to a
Downstream Port. In this case, a Downstream Port's Link may be on either
the upstream or downstream side:
+---------------------+
+------+ | Upstream |
| Root | | Downstream Port +--Link--
| Port +--Link--+ Port |
+------+ | Downstream |
| Port +--Link--
+---------------------+
We can't use the Port type to determine which side the Link is on, so add a
bit in struct pci_dev to keep track.
A Root Port's Link is always on the Port's secondary side. A component
(Endpoint or Port) on the other end of the Link obviously has the Link on
its upstream side. If that component is a Port, it is part of a Switch or
a Bridge. A Bridge has a PCI or PCI-X bus on its secondary side, not a
Link. The internal bus of a Switch connects the Port to another Port whose
Link is on the downstream side.
[bhelgaas: changelog, comment, cache "type", use if/else]
Link: http://lkml.kernel.org/r/54EB81B2.4050904@xxxxxxxxx
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94361
Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sasha.levin@xxxxxxxxxx>
---
drivers/pci/probe.c | 18 ++++++++++++++++++
include/linux/pci.h | 1 +
2 files changed, 19 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 3010ffc..b326a13 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -985,6 +985,8 @@ void set_pcie_port_type(struct pci_dev *pdev)
{
int pos;
u16 reg16;
+ int type;
+ struct pci_dev *parent;
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!pos)
@@ -994,6 +996,22 @@ void set_pcie_port_type(struct pci_dev *pdev)
pdev->pcie_flags_reg = reg16;
pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16);
pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+
+ /*
+ * A Root Port is always the upstream end of a Link. No PCIe
+ * component has two Links. Two Links are connected by a Switch
+ * that has a Port on each Link and internal logic to connect the
+ * two Ports.
+ */
+ type = pci_pcie_type(pdev);
+ if (type == PCI_EXP_TYPE_ROOT_PORT)
+ pdev->has_secondary_link = 1;
+ else if (type == PCI_EXP_TYPE_UPSTREAM ||
+ type == PCI_EXP_TYPE_DOWNSTREAM) {
+ parent = pci_upstream_bridge(pdev);
+ if (!parent->has_secondary_link)
+ pdev->has_secondary_link = 1;
+ }
}
void set_pcie_hotplug_bridge(struct pci_dev *pdev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f188a66..e54f116 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -356,6 +356,7 @@ struct pci_dev {
unsigned int broken_intx_masking:1;
unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */
unsigned int irq_managed:1;
+ unsigned int has_secondary_link:1;
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html