On Thu, Apr 7, 2016 at 1:44 AM, Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> wrote: > According to DesignWare DW_ahb_dmac Databook page 159, > both SRC_MSIZE and DEST_MSIZE values "are not related to > AHB bus mater HBURST bus". > > The hardware uses these values as a unit of TR_WIDTHs. > As both TR_WIDTHs are hardcoded to 4 Bytes, the MSIZEs > should be 16, so the burst transaction length will be: > 64 Bytes. Thanks for the patch. Yes, Måns and I have a branch [1] to bring this driver working back. This change is there already. I would appreciate if you can test this on bare metal. [1] https://bitbucket.org/andy-shev/linux/branch/topic%2Fdw%2Fsata > > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> > --- > drivers/ata/sata_dwc_460ex.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c > index 2fc1516..52f0614 100644 > --- a/drivers/ata/sata_dwc_460ex.c > +++ b/drivers/ata/sata_dwc_460ex.c > @@ -58,7 +58,8 @@ > #define NO_IRQ 0 > #endif > > -#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/ > +#define AHB_DMA_BRST_DFLT 64 > +#define BRST_TRANS_LEN_DFLT 16 > > enum { > SATA_DWC_MAX_PORTS = 1, > @@ -381,8 +382,8 @@ static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd > } > > sconf.direction = qc->dma_dir; > - sconf.src_maxburst = AHB_DMA_BRST_DFLT; > - sconf.dst_maxburst = AHB_DMA_BRST_DFLT; > + sconf.src_maxburst = BRST_TRANS_LEN_DFLT; > + sconf.dst_maxburst = BRST_TRANS_LEN_DFLT; > sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > -- > 2.8.0.rc3 > -- With Best Regards, Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html