Hi Bjorn, On Wed, Mar 30, 2016 at 10:29 AM, Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote: > Am Montag, den 28.03.2016, 18:45 -0300 schrieb Fabio Estevam: >> From: Fabio Estevam <fabio.estevam@xxxxxxx> >> >> Commit 5c5fb40de8f14 ("PCI: imx6: Add support for active-low reset GPIO") >> cause regressions on some boards like MX6 Gateworks Ventana, for example. >> >> The reason for the breakage is that this commit sets the gpio polarity >> in the wrong logic level. >> >> Also, the commit log is wrong because active-low reset GPIO is what the >> driver used to support since the beginning. >> >> So keep the old behavior that ignores the gpio polarity specified in >> the device tree and treat the PCI reset GPIO as active-low. >> >> Cc: <stable@xxxxxxxxxxxxxxx> # 4.5 >> Reported-by: Krzysztof Hałasa <khalasa@xxxxxxx> >> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> > > We need to keep compatibility to existing DTs that are setting the GPIO > active polarity in the wrong way, so this revert is correct: > > Acked-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Any chance to get this into 4.6-rc3 to fix the regression? -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html