In poweroff, we set the reset bit and the power down bit, but only managed to unset the reset bit for poweron. This meant that if HDMI did -EPROBE_DEFER after it had grabbed its clocks, we'd power down the PLLH (that had been on at boot time) and never recover. Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/clk/bcm/clk-bcm2835.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 87616de..7a79708 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -554,6 +554,10 @@ static int bcm2835_pll_on(struct clk_hw *hw) const struct bcm2835_pll_data *data = pll->data; ktime_t timeout; + cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) & + ~A2W_PLL_CTRL_PWRDN); + /* Take the PLL out of reset. */ cprman_write(cprman, data->cm_ctrl_reg, cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST); -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html