From: Zhuang Jin Can <jin.can.zhuang@xxxxxxxxx> 3.4.111-rc1 review patch. If anyone has any objections, please let me know. ------------------ commit 243292a2ad3dc365849b820a64868927168894ac upstream. xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Signed-off-by: Zhuang Jin Can <jin.can.zhuang@xxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Zefan Li <lizefan@xxxxxxxxxx> --- drivers/usb/host/xhci-hub.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a6d4393..9be0c29 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -473,10 +473,13 @@ static void xhci_hub_report_link_state(struct xhci_hcd *xhci, u32 pls = status_reg & PORT_PLS_MASK; /* resume state is a xHCI internal state. - * Do not report it to usb core. + * Do not report it to usb core, instead, pretend to be U3, + * thus usb core knows it's not ready for transfer */ - if (pls == XDEV_RESUME) + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; return; + } /* When the CAS bit is set then warm reset * should be performed on port -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html