[PATCH] rt2x00: read 5GHz TX power values from the correct offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value
for a given channel.

The changes in rt61pci.c and rt73usb.c are compile
tested only.

Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
John,

If there is any chance for that, this should go
into 3.10. However the code is wrong since a few
years and nobody noticed that so far, so it is
not a big problem if it will be applied only in
3.11.

-Gabor
---
 drivers/net/wireless/rt2x00/rt2800lib.c |    4 ++--
 drivers/net/wireless/rt2x00/rt61pci.c   |    3 ++-
 drivers/net/wireless/rt2x00/rt73usb.c   |    3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 3aa30dd..4072242 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6254,8 +6254,8 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
 
 		for (i = 14; i < spec->num_channels; i++) {
-			info[i].default_power1 = default_power1[i];
-			info[i].default_power2 = default_power2[i];
+			info[i].default_power1 = default_power1[i - 14];
+			info[i].default_power2 = default_power2[i - 14];
 		}
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 53754bc6..54d3ddf 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2825,7 +2825,8 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 1616ed4..1d3880e 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2167,7 +2167,8 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]