Patch "wext: fix message delay/ordering" has been added to the 4.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    wext: fix message delay/ordering

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     wext-fix-message-delay-ordering.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 8bf862739a7786ae72409220914df960a0aa80d8 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@xxxxxxxxx>
Date: Wed, 27 Jan 2016 12:37:52 +0100
Subject: wext: fix message delay/ordering

From: Johannes Berg <johannes.berg@xxxxxxxxx>

commit 8bf862739a7786ae72409220914df960a0aa80d8 upstream.

Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.

For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether
(from my hwsim reproduction)

This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.

The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.

To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.

Reported-by: Beniamino Galvani <bgalvani@xxxxxxxxxx>
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 net/wireless/wext-core.c |   51 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 11 deletions(-)

--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -342,6 +342,39 @@ static const int compat_event_type_size[
 
 /* IW event code */
 
+static void wireless_nlevent_flush(void)
+{
+	struct sk_buff *skb;
+	struct net *net;
+
+	ASSERT_RTNL();
+
+	for_each_net(net) {
+		while ((skb = skb_dequeue(&net->wext_nlevents)))
+			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
+				    GFP_KERNEL);
+	}
+}
+
+static int wext_netdev_notifier_call(struct notifier_block *nb,
+				     unsigned long state, void *ptr)
+{
+	/*
+	 * When a netdev changes state in any way, flush all pending messages
+	 * to avoid them going out in a strange order, e.g. RTM_NEWLINK after
+	 * RTM_DELLINK, or with IFF_UP after without IFF_UP during dev_close()
+	 * or similar - all of which could otherwise happen due to delays from
+	 * schedule_work().
+	 */
+	wireless_nlevent_flush();
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block wext_netdev_notifier = {
+	.notifier_call = wext_netdev_notifier_call,
+};
+
 static int __net_init wext_pernet_init(struct net *net)
 {
 	skb_queue_head_init(&net->wext_nlevents);
@@ -360,7 +393,12 @@ static struct pernet_operations wext_per
 
 static int __init wireless_nlevent_init(void)
 {
-	return register_pernet_subsys(&wext_pernet_ops);
+	int err = register_pernet_subsys(&wext_pernet_ops);
+
+	if (err)
+		return err;
+
+	return register_netdevice_notifier(&wext_netdev_notifier);
 }
 
 subsys_initcall(wireless_nlevent_init);
@@ -368,17 +406,8 @@ subsys_initcall(wireless_nlevent_init);
 /* Process events generated by the wireless layer or the driver. */
 static void wireless_nlevent_process(struct work_struct *work)
 {
-	struct sk_buff *skb;
-	struct net *net;
-
 	rtnl_lock();
-
-	for_each_net(net) {
-		while ((skb = skb_dequeue(&net->wext_nlevents)))
-			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
-				    GFP_KERNEL);
-	}
-
+	wireless_nlevent_flush();
 	rtnl_unlock();
 }
 


Patches currently in stable-queue which might be from johannes.berg@xxxxxxxxx are

queue-4.4/mac80211-check-pn-correctly-for-gcmp-encrypted-fragmented-mpdus.patch
queue-4.4/cfg80211-wext-fix-message-ordering.patch
queue-4.4/mac80211-minstrel_ht-set-default-tx-aggregation-timeout-to-0.patch
queue-4.4/mac80211-fix-public-action-frame-rx-in-ap-mode.patch
queue-4.4/wext-fix-message-delay-ordering.patch
queue-4.4/mac80211-minstrel-change-expected-throughput-unit-back-to-kbps.patch
queue-4.4/mac80211-minstrel_ht-fix-a-logic-error-in-rts-cts-handling.patch
queue-4.4/mac80211-fix-use-of-uninitialised-values-in-rx-aggregation.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]